[chirp_users] uv 82 hp Chirp error out of supported range
hello,
in attempting to program the uv82hp for frs/gmrs i get "out of supported range" error.
in "other settings", the lower/upper limits are within range.
any ideas?
thanks
Go into settings/other settings and change the band limits.
On 12 May 2018 at 19:23 william lliammy@hughes.net wrote:
hello,
in attempting to program the uv82hp for frs/gmrs i get "out of supported range" error.
in "other settings", the lower/upper limits are within range.
any ideas?
thanks
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel@ngunn.net www http://www.ngunn.net Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club International #385, Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.
On Sat, May 12, 2018 at 7:23 PM, william lliammy@hughes.net wrote:
hello,
in attempting to program the uv82hp for frs/gmrs i get "out of supported range" error.
in "other settings", the lower/upper limits are within range.
any ideas?
thanks
You must be entering the frequency incorrectly. One suggestion would be to attach a debug.log file. Another would be to rry importing the frequencies using the "US FRS and GMRS Channels" stock config file.
Jim KC9HI
participants (3)
-
Jim Unroe -
Nigel A. Gunn G8IFF/W8IFF -
william