Here's the procedure for submitting a request. I hope this assists.

________________

The official CHIRP website is:

http://chirp.danplanet.com/projects/chirp/wiki/Home

Here's the procedure for requesting a new radio...

If you would like to open a request, you would need to

- Go to the CHIRP website. (link above)

- Register to the website (upper right corner)

- Select the Issues Tab and verify that the request for the new radio hasn't already been submitted.

- If it's not found, select the New Issue tab and submit your request.

- Check back periodically to review the status of your request.

At that time a volunteer interested in taking on the project will respond to the request.

In most cases, a loaner radio is required so it can be backward engineered.

http://www.miklor.com/COM/UV_CHIRP.php

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of wcurlew@juno.com Sent: Thursday, June 28, 2018 11:38 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] QYT FT7900D Feature request

The QYT FT7900D does not allow modification of the bandwidth (wide/narrow) parameter on a stored channel. Could this be added as a column on the Chirp screen?

Thanks,

Bill Curlew

____________________________________________________________ http://thirdpartyoffers.juno.com/TGL3132/5b3500dc49f47dc2e9bst03vuc Kelly Ripa Finally Confirms The Rumors risingstarnewspaper.com http://thirdpartyoffers.juno.com/TGL3132/5b3500dc49f47dc2e9bst03vuc http://thirdpartyoffers.juno.com/TGL3132/5b3500dc49f47dc2e9bst03vuc SponsoredBy Content.Ad https://d32oduq093hvot.cloudfront.net/icons/sponsoredlinksby.png