Programming a dual band with band A being VHF and band B being UHF, how do I set up Band B for programming. Using a UV5R. Thanks, K4NDN
Hi Eric,
On Tue, Feb 16, 2021 at 8:36 AM Eric Evans e.evans1369@gmail.com wrote:
Programming a dual band with band A being VHF and band B being UHF, how do I set up Band B for programming. Using a UV5R. Thanks, K4NDN
What you want to do cannot be done. The UV-5R (and similar radio models) have a single bank of 128 channels (0-127). Both the top (A) display line and bottom (B) display line have equal access to these 128 channels. These radios do not include a feature that allows the user to separate them channels by display line.
Jim KC9HI
A UV5R only has one channel bank. The channels cannot be separated into two sections.
On Feb 16, 2021, at 8:35 AM, Eric Evans e.evans1369@gmail.com wrote:
Programming a dual band with band A being VHF and band B being UHF, how do I set up Band B for programming. Using a UV5R. Thanks, K4NDN
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
If you want the appearance of a VHF bank and a UHF bank, you could put the VHF frequencies in memories 1-64 and UFH frequencies in memories 65-128, then just keep A in the top half of memories and B in the bottom half of the memories.
On Tue, Feb 16, 2021 at 9:50 AM John LaMartina JohnLa@usa.net wrote:
A UV5R only has one channel bank. The channels cannot be separated into two sections.
On Feb 16, 2021, at 8:35 AM, Eric Evans e.evans1369@gmail.com wrote:
Programming a dual band with band A being VHF and band B being UHF, how do I set up Band B for programming. Using a UV5R. Thanks, K4NDN
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to thomasweiss3@gmail.com at thomasweiss3@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
Eric Evans -
Jim Unroe -
John LaMartina -
Thomas Weiss