[chirp_users] UV-5RTP Settings Tab
Good afternoon,
I recently set up my UV-5RTP using chirp. I uploaded my new memories but went back to change some settings and the settings tab is blank. I have re uploaded, restarted the program and radio, and tried to start over to no avail. Any guidance would be appreciated.
Thank you.
Jack
Hi Jack,
Good afternoon,
I recently set up my UV-5RTP using chirp. I uploaded my new memories but went back to change some settings and the settings tab is blank. I have re uploaded, restarted the program and radio, and tried to start over to no avail. Any guidance would be appreciated.
Thank you.
Jack
This usually happens when one or more settings in the radio are out of range. Which settings can usually be determined by reviewing the debug.log file. If you would email your "image" file to me, I will determine which settings are amiss, set them to valid values and return the fixed image to you.
Jim KC9HI
Can Baojie 218 programmed through CHIRP... It always reboots in Tx
On Thu, 21 Apr, 2022, 7:28 pm Jack Earl, jackwearl93@gmail.com wrote:
Good afternoon,
I recently set up my UV-5RTP using chirp. I uploaded my new memories but went back to change some settings and the settings tab is blank. I have re uploaded, restarted the program and radio, and tried to start over to no avail. Any guidance would be appreciated.
Thank you.
Jack
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to vu3ucv@gmail.com at vu3ucv@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
On Sat, May 7, 2022 at 1:57 PM vu3 ucv vu3ucv@gmail.com wrote:
Can Baojie 218 programmed through CHIRP... It always reboots in Tx
It is listed in the Supported Radio Models list on the CHIRP home page. I don't have the Baojie BJ-218 but I have the Luiton LT-725uv variant. It programs fine with CHIRP. I know others that have the BJ-218 and use CHIRP to program it.
Jim KC9HI
participants (3)
-
Jack Earl -
Jim Unroe -
vu3 ucv