[chirp_users] clone error
i once had a vx7-r and would get clone errors.yeasu's are kinda hard to program.with my vx7-r there was a key on the key pad that had to be pushed just before you pushed the enter key on your computer to get your radio programmed. i do not remember which key on the radio needs to be pushed before programming the radio Leonard
On Tue, Dec 1, 2015 at 1:24 PM, LeonardKeepers Leonard.Keepers@comcast.net wrote:
i once had a vx7-r and would get clone errors.yeasu's are kinda hard to program.with my vx7-r there was a key on the key pad that had to be pushed just before you pushed the enter key on your computer to get your radio programmed. i do not remember which key on the radio needs to be pushed before programming the radio Leonard
You're in luck! When programming the VX-7, Chirp prompts you with instructions of which keys to press (unless you've clicked "don't show instructions again").
Tom KD7LXL
On Tue, Dec 1, 2015 at 5:08 PM, Tom Hayward tom@tomh.us wrote:
On Tue, Dec 1, 2015 at 1:24 PM, LeonardKeepers Leonard.Keepers@comcast.net wrote:
i once had a vx7-r and would get clone errors.yeasu's are kinda hard to program.with my vx7-r there was a key on the key pad that had to be pushed just before you pushed the enter key on your computer to get your radio programmed. i do not remember which key on the radio needs to be pushed before programming the radio Leonard
You're in luck! When programming the VX-7, Chirp prompts you with instructions of which keys to press (unless you've clicked "don't show instructions again").
Tom KD7LXL
And (unless you are running the CHIRP v0.4.x stable build or a daily build that was released prior to this feature being added.)
Jim KC9HI
The issue isn’t which key to press. Nor is it the instructions that pop up with Chirp. Chirp’s instructions are to prep the radio… you have to refer to Yeast’s instructions for cloning. This isn’t a VX-7 either; it is a VX-5.
The correct key is to depress the MR-SKP-SC button to engage the CLONE WAIT prompt. Upon pressing OK in Chirp’s pop-up that includes the instructions (the final prompt before uploading), the upload process begins. It isn’t until about ¾ through that the CLONE ERROR condition occurs. Consequently, the data LEDs at the base of Valley Enterprises’s USB cable also cease to illuminate. The version I am running of Chirp is today’s daily build: 120115.
On Dec 1, 2015, at 5:21 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Dec 1, 2015 at 5:08 PM, Tom Hayward tom@tomh.us wrote:
On Tue, Dec 1, 2015 at 1:24 PM, LeonardKeepers Leonard.Keepers@comcast.net wrote:
i once had a vx7-r and would get clone errors.yeasu's are kinda hard to program.with my vx7-r there was a key on the key pad that had to be pushed just before you pushed the enter key on your computer to get your radio programmed. i do not remember which key on the radio needs to be pushed before programming the radio Leonard
You're in luck! When programming the VX-7, Chirp prompts you with instructions of which keys to press (unless you've clicked "don't show instructions again").
Tom KD7LXL
And (unless you are running the CHIRP v0.4.x stable build or a daily build that was released prior to this feature being added.)
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
AJ Pulley -
Jim Unroe -
LeonardKeepers -
Tom Hayward