[chirp_users] Uv5r and 8hp programming
On a baofeng uv5r and 8hp- how do I show the assigned name to each channel to be displayed on radio. Programmed thru chirp and it shows the name but displays frequency Numbers on radio display . Can they be set up to show the name on channel mode -a and b--and then show the assigned frequency number to same when switched to freq Mode Also what about squelch setting I can only here rx on local weather channel band
Sent from my iPad
Foto www.miklor.com and look at the FAQs. These questions and many more are answered there.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Nov 11, 2016, at 04:56, Mark gingrich.ms@gmail.com wrote:
On a baofeng uv5r and 8hp- how do I show the assigned name to each channel to be displayed on radio. Programmed thru chirp and it shows the name but displays frequency Numbers on radio display . Can they be set up to show the name on channel mode -a and b--and then show the assigned frequency number to same when switched to freq Mode Also what about squelch setting I can only here rx on local weather channel band
Sent from my iPad _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Fri, Nov 11, 2016 at 7:56 AM, Mark gingrich.ms@gmail.com wrote:
On a baofeng uv5r and 8hp- how do I show the assigned name to each channel to be displayed on radio. Programmed thru chirp and it shows the name but displays frequency Numbers on radio display . Can they be set up to show the name on channel mode -a and b--and then show the assigned frequency number to same when switched to freq Mode Also what about squelch setting I can only here rx on local weather channel band
You must set the Memory Display Format to the format that you want: CHannel, NAME or FREQuency.
You can do this using menu 21 (MDF-A) and menu 22 (MDF-B) of the radio or the settings within CHIRP.
Settings -> Basic Settings -> Display Mode (A): Settings -> Basic Settings -> Display Mode (B):
So in MR (channel) mode, each display line will be formatted based on your selections. VFO (frequency) mode only displays the frequency of the VFOs. It has nothing to do with the channels in MR mode.
If you want to see the name and frequency at the same time, you must set one display to NAME and the other display to FREQ and then manually select the same channel in both displays.
It sounds like you have set Tone Mode to TSQL on channels where the station you are listening to (probably a repeater) does not transmit a tone. This is common for ham repeaters. If this is the case, you should be using Tone at the Tone Mode.
Jim
participants (3)
-
Jardy -
Jim Unroe -
Mark