I have some software and cables from RTsystems and I have used their cables for many years and have never had any problems with them.

Jock. KC6IIH On Friday, July 26, 2019 Nigel A. Gunn G8IFF/W8IFF chirp_users@intrepid.danplanet.com wrote:

No, but their software only works with  their cable. RT cables work OK with Chirp,

On 26 July 2019 at 12:17 John La Johnla@usa.net wrote:

Is it possible the RT cable is proprietary to their software only?

John K3NXU www.Miklor.com

-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jan Ditzian Sent: Thursday, July 25, 2019 8:27 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Yaesu 3200D and RT Systems cable problem

I have an RT Systems Yaesu programming cable for a Yaesu FT-1900 two-meter mobile radio that fits my new FTM-3200D radio. I installed the latest Chirp, as of today, and it knows about the FT-3200D. I plugged the cable into the computer USB and the radio microphone jack. By trial and error, I discovered that the FTM-3200D goes into CLONE mode by holding in SETUP and then turning it on. Also, by trial and error, I found that the FTM-3200D went into TRANSMIT mode to the computer by starting the Chirp Download from Radio, and then pressing REV on the FT-3200, whereupon the radio went to TX mode and began to count up, and Chirp also showed that it was downloading data. The process finished, the radio went back to CLONE, but Chirp returned a checksum error. Chirp does not display any radio data after the failure. To sum up, the radio is happy that it spoke to Chirp, but Chirp is not happy with what it heard, probably at the end of the exchange.

Does anyone know how I can get past this error message?

Thank you and 73,

Jan, KX2A

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih@aol.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com