[chirp_users] Squelch On Specific Channels
Hi All, I was just out trying to bounce off the ISS repeater with the 5 downlink frequencies programmed into my Baofeng BF9, which I think has the same basic settings as the UV5R except some power levels. I need to keep the squelch open when I'm listening, but I don't think it works to hold the squelch open and PTT at the same time. Is there a squelch level per channel, in Chirp, or is this only in the menus for all the channels? I didn't see it in the column headings, but I thought I'd make sure here. Thanks.
Glenn
On Wed, Jul 27, 2022 at 11:48 PM K0LNY_Glenn glenn@ervin.email wrote:
Hi All, I was just out trying to bounce off the ISS repeater with the 5 downlink frequencies programmed into my Baofeng BF9, which I think has the same basic settings as the UV5R except some power levels. I need to keep the squelch open when I'm listening, but I don't think it works to hold the squelch open and PTT at the same time. Is there a squelch level per channel, in Chirp, or is this only in the menus for all the channels? I didn't see it in the column headings, but I thought I'd make sure here. Thanks.
Glenn
Squelch is a global setting. It cannot be set on a per-channel basis.
Jim KC9HI
participants (2)
-
Jim Unroe -
K0LNY_Glenn