[chirp_users] Baofeng uv-9 plus cable
Can anyone suggest a cable that actually works with the Baofeng uv-9 plus on chirp?
Jeremiah W.
This is the one I got from Amazon. It works. I had installation problems with the Chirp software but they were probably my fault, but they had nothing to do with the cable.
Original Baofeng USB Programming Cable for Baofeng UV-9R BF-9700 A-58 UV-XR UV-5S GT-3WP Plus Handheld ham Radio transceiver Uportable Ham Handheld CB Radio USA Warranty Visit the Mirkit Store https://www.amazon.com/stores/Mirkit/page/DA66AF60-3938-435F-BCA9-3ECC8310FF03?ref_=ast_bln
On Sun, Sep 6, 2020 at 7:23 PM Jeremiah Williams via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
On Sun, Sep 6, 2020 at 9:24 PM Jeremiah Williams via chirp_users chirp_users@intrepid.danplanet.com wrote:
Can anyone suggest a cable that actually works with the Baofeng uv-9 plus on chirp?
Jeremiah W.
Jeremiah,
The programming cable that I use with my Retevis RT6 (same connection) was packed with the radio. So I would imagine it is a Retevis programming cable. It is manufactured with the counterfeit Prolific chip so, as usual, I have to downgrade the driver installed by Windows to the older Prolific v3.2.0.0 device driver before it will work.
Here is an ebay listing for one like it. It ships from China so expect it to take a few weeks to be delivered. https://www.ebay.com/itm/Retevis-Original-Programming-Cable-For-RETEVIS-RT6-...
Jim KC9HI
participants (3)
-
Jeremiah Williams -
Jim Unroe -
Paul Hansen