[chirp_users] OT headphone output
Hello,
If this is too off topic, scold me and I'll never do it again.
I have a UV-5R. I love this $25 radio for what it is, except.
I want to use headphones. However I cannot stand to have audio in just one ear. Plus I drive noisy lawn gear and tractors. I use ear buds with gun muffs over the ear. Microphone will come later when I get my technician test passed.
The head phone output is 2.5mm TRS (this alone bugs the crap out of me.) In addition, the tip only carries audio and the ring is TX data. When the radio is scanning there is a low frequency thump in time with the scan that comes out the data port ring.
If I plug a 2.5mm TS the data port ring will short to the sleeve. I'm not sure this is good idea.
So, I think my only option is to buy a 2.5mm TRS and make a mono cord that only uses the tip. I can then split it to a stereo TRS 3.5mm female to plug my earbuds into.
Any other ideas would be appreciated.
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
Dennis,
Fell free to contact me off list if you like. I am a retired Deputy Sheriff and I noticed when I got my UV-5R that the mic and earphone ports looked identical to my duty radio which was a Kenwood. That opened up a range of possible accessories most of which I found on eBay. Even programming cables. I never had to make anything. Always cheap and quick delivery.
I hope this helps.
Thanks, David, KD7UCH@arrl.net
On Tue, Mar 20, 2018, 09:36 Dennis Wage dwage@dwage.com wrote:
Hello,
If this is too off topic, scold me and I'll never do it again.
I have a UV-5R. I love this $25 radio for what it is, except.
I want to use headphones. However I cannot stand to have audio in just one ear. Plus I drive noisy lawn gear and tractors. I use ear buds with gun muffs over the ear. Microphone will come later when I get my technician test passed.
The head phone output is 2.5mm TRS (this alone bugs the crap out of me.) In addition, the tip only carries audio and the ring is TX data. When the radio is scanning there is a low frequency thump in time with the scan that comes out the data port ring.
If I plug a 2.5mm TS the data port ring will short to the sleeve. I'm not sure this is good idea.
So, I think my only option is to buy a 2.5mm TRS and make a mono cord that only uses the tip. I can then split it to a stereo TRS 3.5mm female to plug my earbuds into.
Any other ideas would be appreciated.
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Evans at kd7uch@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I'm not sure if this provides enough noise isolation, but how about a full headset designed for the radio?
Here's an example: - https://www.amazon.com/Retevis-Earpiece-Overhead-Headphone-Kenwood/dp/B01CZU...
------ Original Message ------ From: "David Evans" kd7uch@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: 3/20/2018 10:16:39 AM Subject: Re: [chirp_users] OT headphone output
Dennis,
Fell free to contact me off list if you like. I am a retired Deputy Sheriff and I noticed when I got my UV-5R that the mic and earphone ports looked identical to my duty radio which was a Kenwood. That opened up a range of possible accessories most of which I found on eBay. Even programming cables. I never had to make anything. Always cheap and quick delivery.
I hope this helps.
Thanks, David, KD7UCH@arrl.net
On Tue, Mar 20, 2018, 09:36 Dennis Wage dwage@dwage.com wrote:
Hello,
If this is too off topic, scold me and I'll never do it again.
I have a UV-5R. I love this $25 radio for what it is, except.
I want to use headphones. However I cannot stand to have audio in just one ear. Plus I drive noisy lawn gear and tractors. I use ear buds with gun muffs over the ear. Microphone will come later when I get my technician test passed.
The head phone output is 2.5mm TRS (this alone bugs the crap out of me.) In addition, the tip only carries audio and the ring is TX data. When the radio is scanning there is a low frequency thump in time with the scan that comes out the data port ring.
If I plug a 2.5mm TS the data port ring will short to the sleeve. I'm not sure this is good idea.
So, I think my only option is to buy a 2.5mm TRS and make a mono cord that only uses the tip. I can then split it to a stereo TRS 3.5mm female to plug my earbuds into.
Any other ideas would be appreciated.
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://hammondb3organ.net/ http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Evans at kd7uch@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Turns out, there is an adapter for 3.5mm headphones. Looks like you can use your own earbuds (and accommodates those with a microphone for transmit): - https://www.amazon.com/BTECH-Connector-Adapter-Compatible-Headsets/dp/B019YJ...
------ Original Message ------ From: "Aubrey Turner" aubrey.c.turner@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: 3/20/2018 10:19:57 AM Subject: Re[2]: [chirp_users] OT headphone output
I'm not sure if this provides enough noise isolation, but how about a full headset designed for the radio?
Here's an example:
https://www.amazon.com/Retevis-Earpiece-Overhead-Headphone-Kenwood/dp/B01CZU...
------ Original Message ------ From: "David Evans" kd7uch@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: 3/20/2018 10:16:39 AM Subject: Re: [chirp_users] OT headphone output
Dennis,
Fell free to contact me off list if you like. I am a retired Deputy Sheriff and I noticed when I got my UV-5R that the mic and earphone ports looked identical to my duty radio which was a Kenwood. That opened up a range of possible accessories most of which I found on eBay. Even programming cables. I never had to make anything. Always cheap and quick delivery.
I hope this helps.
Thanks, David, KD7UCH@arrl.net
On Tue, Mar 20, 2018, 09:36 Dennis Wage dwage@dwage.com wrote:
Hello,
If this is too off topic, scold me and I'll never do it again.
I have a UV-5R. I love this $25 radio for what it is, except.
I want to use headphones. However I cannot stand to have audio in just one ear. Plus I drive noisy lawn gear and tractors. I use ear buds with gun muffs over the ear. Microphone will come later when I get my technician test passed.
The head phone output is 2.5mm TRS (this alone bugs the crap out of me.) In addition, the tip only carries audio and the ring is TX data. When the radio is scanning there is a low frequency thump in time with the scan that comes out the data port ring.
If I plug a 2.5mm TS the data port ring will short to the sleeve. I'm not sure this is good idea.
So, I think my only option is to buy a 2.5mm TRS and make a mono cord that only uses the tip. I can then split it to a stereo TRS 3.5mm female to plug my earbuds into.
Any other ideas would be appreciated.
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://hammondb3organ.net/ http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Evans at kd7uch@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (3)
-
Aubrey Turner -
David Evans -
Dennis Wage