[chirp_users] Bug #2155 - Uv-5r not receiving but will transmitt
This not fixed. I tried all those steps suggested and it did not work. The radio was fine until I loaded my old file with chrip onto the new Uv-5r. Then receive got muted.
I tried the factory image and leaving the beep on. Nothing works. I am upset because it looks like the radio is ruined.
73 KA2HJH,
Sincerely,
Larry Stewart Splitrock ARA Webmaster 862-324-6232
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp_users-request@intrepid.danplanet.com Sent: Wednesday, January 28, 2015 10:12 PM To: lstew452@optonline.net Subject: Welcome to the "chirp_users" mailing list (Digest mode)
Welcome to the chirp_users@intrepid.danplanet.com mailing list! This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest beta will be available here:
http://chirp.danplanet.com/download/beta/
To post to this list, send your email to:
chirp_users@intrepid.danplanet.com
General information about the mailing list is at:
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at:
http://intrepid.danplanet.com/mailman/options/chirp_users/lstew452%40optonli ne.net
You can also make such adjustments via email by sending a message to:
chirp_users-request@intrepid.danplanet.com
with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions.
You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is:
pine1brk
Normally, Mailman will remind you of your intrepid.danplanet.com mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you.
http://www.miklor.com/uv5r/UV5R-RecoverN5R.php
On Wed, Jan 28, 2015 at 9:59 PM, Lawrence Stewart lstew452@optonline.net wrote:
This not fixed. I tried all those steps suggested and it did not work. The radio was fine until I loaded my old file with chrip onto the new Uv-5r. Then receive got muted.
I tried the factory image and leaving the beep on. Nothing works. I am upset because it looks like the radio is ruined.
73 KA2HJH,
Sincerely,
Larry Stewart Splitrock ARA Webmaster 862-324-6232
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp_users-request@intrepid.danplanet.com Sent: Wednesday, January 28, 2015 10:12 PM To: lstew452@optonline.net Subject: Welcome to the "chirp_users" mailing list (Digest mode)
Welcome to the chirp_users@intrepid.danplanet.com mailing list! This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest beta will be available here:
http://chirp.danplanet.com/download/beta/
To post to this list, send your email to:
chirp_users@intrepid.danplanet.com
General information about the mailing list is at:
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at:
http://intrepid.danplanet.com/mailman/options/chirp_users/lstew452%40optonli ne.net
You can also make such adjustments via email by sending a message to:
chirp_users-request@intrepid.danplanet.com
with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions.
You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is:
pine1brk
Normally, Mailman will remind you of your intrepid.danplanet.com mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
On Wed, Jan 28, 2015 at 10:59 PM, Lawrence Stewart lstew452@optonline.net wrote:
This not fixed. I tried all those steps suggested and it did not work. The radio was fine until I loaded my old file with chrip onto the new Uv-5r. Then receive got muted.
Now that Baofeng changed the memory layout with the introduction of N5R firmware, this is something that you must not do. The latest CHIRP daily builds (since October 2014) prevent this. CHIRP stable does not not prevent this because it was released before radios with N5R firmware were available.
I tried the factory image and leaving the beep on. Nothing works. I am upset because it looks like the radio is ruined.
The radio is not ruined. These are the steps that you must follow.
http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R
73 KA2HJH,
Sincerely,
Larry Stewart Splitrock ARA Webmaster 862-324-6232
Another solution would be for you to download a "fresh" CHIRP Radio Image from your radio and email it to me. I will make an "adjustment" to it and email it back. Then you will have to upload this "image" back into your radio.
Once you radio is working normally again, and it will, you will need to upgrade CHIRP to the latest daily build.
Jim KC9HI
you included your password in the email, you should can that ASAP
On Wed, Jan 28, 2015 at 11:59 PM, Lawrence Stewart lstew452@optonline.net wrote:
This not fixed. I tried all those steps suggested and it did not work. The radio was fine until I loaded my old file with chrip onto the new Uv-5r. Then receive got muted.
I tried the factory image and leaving the beep on. Nothing works. I am upset because it looks like the radio is ruined.
73 KA2HJH,
Sincerely,
Larry Stewart Splitrock ARA Webmaster 862-324-6232
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp_users-request@intrepid.danplanet.com Sent: Wednesday, January 28, 2015 10:12 PM To: lstew452@optonline.net Subject: Welcome to the "chirp_users" mailing list (Digest mode)
Welcome to the chirp_users@intrepid.danplanet.com mailing list! This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest beta will be available here:
http://chirp.danplanet.com/download/beta/
To post to this list, send your email to:
chirp_users@intrepid.danplanet.com
General information about the mailing list is at:
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at:
http://intrepid.danplanet.com/mailman/options/chirp_users/lstew452%40optonli ne.net
You can also make such adjustments via email by sending a message to:
chirp_users-request@intrepid.danplanet.com
with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions.
You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is:
pine1brk
Normally, Mailman will remind you of your intrepid.danplanet.com mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (4)
-
Galen Thurber -
Jim Unroe -
Lawrence Stewart -
Todd Bloomingdale