[chirp_users] any DMR radios supported?
I'm beginning to look into DMR radios, and so far none are listed on the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks!
There are a couple third-party 'contact managers' for various DMR radios that support multiple models/manufacturers, but typically people seem to use the vendor-supplied software.
Ken, N2VIP
On Feb 18, 2022, at 12:24, Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
https://github.com/hmatuschek/qdmr And https://www.farnsworth.org/dale/codeplug/editcp/ Are two open source options focused on DMR radios.
Thanks, Zero
On Fri, Feb 18, 2022, 13:25 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Farina at sidhayn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Another option supporting all the REQUIRED information to program a DMR code plug is qdmr https://dm3mat.darc.de/qdmr/. It is not radio specific, so it does not support options that are unique to any specific radio, but it has a nice graphical interface and works well. It runs under Linux. If that is not your cup of tea, stick to the CPS provided by the manufacturer of your DMR radio!
On Fri, Feb 18, 2022 at 11:41 AM Sid Hayn sidhayn@gmail.com wrote:
https://github.com/hmatuschek/qdmr And https://www.farnsworth.org/dale/codeplug/editcp/ Are two open source options focused on DMR radios.
Thanks, Zero
On Fri, Feb 18, 2022, 13:25 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Farina at sidhayn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Pat Anderson at anderson5420@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
From my limited understanding, it would take a complete rewrite of the core
gubbins of CHIRP in order to support the relational data structure of DMR radios. DMR settings are of a different order of complexity, and in addition, firmware for radios is constantly under development with the ongoing compatibility issues which that entails. Personally, I reluctantly use the factory software for my Motorolas, Hytera and Anytones under Windoze whithin a Virtual Machine.
On Fri, 18 Feb 2022 at 18:24, Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
EditCP is as good as it gets if you buy a compatible radio. Chirp will likely never fully support digital voice mode radios.
On 18/02/2022 13:22 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
I wish I could code because I would love to add DMR to Chirp. The vendor solutions honestly suck... All off the will do strange stuff, and the are all tied to M$ at the hip... Sorry state,
EditCP is a very good solution for the radios it supports as Nigel indicated. The one group of radios it does not support are the Anytone, if he supported those that would be a definite plus.
On Fri, Feb 18, 2022 at 1:26 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
EditCP is as good as it gets if you buy a compatible radio. Chirp will likely never fully support digital voice mode radios.
On 18/02/2022 13:22 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the
compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing
list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
does anyone know if CHIRP will support the new baofeng AR-152? or perhaps know where to find software?
On Fri, Feb 18, 2022 at 1:26 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
EditCP is as good as it gets if you buy a compatible radio. Chirp will likely never fully support digital voice mode radios.
On 18/02/2022 13:22 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the
compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing
list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cortchubby20007@gmail.com at cortchubby20007@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Tried the manufacturer's website?
On 18/02/2022 19:54 White Ranger cortchubby20007@gmail.com wrote:
does anyone know if CHIRP will support the new baofeng AR-152? or perhaps know where to find software?
On Fri, Feb 18, 2022 at 1:26 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
EditCP is as good as it gets if you buy a compatible radio. Chirp will likely never fully support digital voice mode radios.
On 18/02/2022 13:22 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cortchubby20007@gmail.com at cortchubby20007@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
RT Systems has software for the AR-152.
On Fri, Feb 18, 2022 at 7:57 PM White Ranger cortchubby20007@gmail.com wrote:
does anyone know if CHIRP will support the new baofeng AR-152? or perhaps know where to find software?
On Fri, Feb 18, 2022 at 1:26 PM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
EditCP is as good as it gets if you buy a compatible radio. Chirp will likely never fully support digital voice mode radios.
On 18/02/2022 13:22 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on
the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing
list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cortchubby20007@gmail.com at cortchubby20007@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Please do not hijack the thread, it is about DMR radios and Chirp, this is an analog radio.
On Sat, Feb 19, 2022 at 11:59 AM John Wuest jhwuest@gmail.com wrote:
RT Systems has software for the AR-152.
On Fri, Feb 18, 2022 at 7:57 PM White Ranger cortchubby20007@gmail.com wrote:
does anyone know if CHIRP will support the new baofeng AR-152? or perhaps know where to find software?
On Fri, Feb 18, 2022 at 1:26 PM Nigel A. Gunn G8IFF/W8IFF < nigel@ngunn.net> wrote:
EditCP is as good as it gets if you buy a compatible radio. Chirp will likely never fully support digital voice mode radios.
On 18/02/2022 13:22 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on
the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing
list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cortchubby20007@gmail.com at cortchubby20007@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I'm using QDMR for my DMR radio on Linux. My Anytone 878UV works fine with it.
On Sat, Feb 19, 2022 at 1:28 PM Chuck Hast kp4djt@gmail.com wrote:
Please do not hijack the thread, it is about DMR radios and Chirp, this is an analog radio.
On Sat, Feb 19, 2022 at 11:59 AM John Wuest jhwuest@gmail.com wrote:
RT Systems has software for the AR-152.
On Fri, Feb 18, 2022 at 7:57 PM White Ranger cortchubby20007@gmail.com wrote:
does anyone know if CHIRP will support the new baofeng AR-152? or perhaps know where to find software?
On Fri, Feb 18, 2022 at 1:26 PM Nigel A. Gunn G8IFF/W8IFF < nigel@ngunn.net> wrote:
EditCP is as good as it gets if you buy a compatible radio. Chirp will likely never fully support digital voice mode radios.
On 18/02/2022 13:22 Patrick Larkin Jr plarkinjr@gmail.com wrote:
I'm beginning to look into DMR radios, and so far none are listed on
the compatible radios list. Is this a generally true statement that CHIRP doesn't support DMR? If not, I guess it's also safe to say it isn't coming soon. What are DMR folks using most of the time to program their radios? The software that comes from the radio vendor?
Thanks! _______________________________________________ chirp_users mailing
list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cortchubby20007@gmail.com at cortchubby20007@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
--
Chuck -- KP4DJT HamHotline # 11259 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to W5NNH at kemkerj3@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
participants (10)
-
Chuck Hast -
John Kemker -
John Wuest -
Ken Hansen -
Nigel A. Gunn G8IFF/W8IFF -
Pat Anderson -
Patrick Larkin Jr -
Sid Hayn -
Tony Ling -
White Ranger