[chirp_users] Kenwood d710g - clone mode
I have a D710G I’m trying to upalcate using chirp. I have a baseline image taken with kenwood software as a backup that I’ve been rolling back to as I troubleshoot.
I initially take a read from the radio (plugged into the radio, not the display) add new simplex and repeaters to memory, write to the radio and when it comes back up I have channels on the display(instead of frequencies it displays CH followed by the memory number) and no VFO mode or access to the menus.
Any ideas where I’ve gone astray?
Thanks Chris N2CDV
when I try downloading from the radio. Windows 10
On Sun, Apr 30, 2023, 1:24 PM Chris Vandivere chris@vandivere.com wrote:
I have a D710G I’m trying to upalcate using chirp. I have a baseline image taken with kenwood software as a backup that I’ve been rolling back to as I troubleshoot.
I initially take a read from the radio (plugged into the radio, not the display) add new simplex and repeaters to memory, write to the radio and when it comes back up I have channels on the display(instead of frequencies it displays CH followed by the memory number) and no VFO mode or access to the menus.
Any ideas where I’ve gone astray?
Thanks Chris N2CDV _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James at kf7nyc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
participants (2)
-
Chris Vandivere -
James Hamaker