I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp is fussy still wont read my ft2800m on my 5th cable ftdi
all cables work on ft1802 must just be bug in chirp
On 8/23/2016 7:01 AM, Dick Smith wrote:
I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Richard at fergy1@telus.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
I have no issues with chirp on my ft2800 Jack W4GRJ
On Aug 23, 2016, at 12:31 PM, Richard fergy1@telus.net wrote:
chirp is fussy still wont read my ft2800m on my 5th cable ftdi all cables work on ft1802 must just be bug in chirp
On 8/23/2016 7:01 AM, Dick Smith wrote: I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Richard at fergy1@telus.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
This email has been checked for viruses by Avast antivirus software. www.avast.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jack at w4grj@satterfield.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Dick, If you are using Windows, you need to install the driver before ever plugging in the cable, or you will have problems. In that instance, if it was plugged into windows without installing the driver first, you may need to remove it from device manager, and install the windows driver, and then plug it in again. I think Linux does not need a driver installed. Glenn ----- Original Message ----- From: "Dick Smith" w4rss@radioclub.org To: chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 9:01 AM Subject: [chirp_users] ID-880H
I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
What version of Windows?
8 and 10 automatically found the driver on my valley cable
Sent from a tiny keyboard
On Aug 23, 2016, at 8:14 PM, Glenn glennervin@cableone.net wrote:
Dick, If you are using Windows, you need to install the driver before ever plugging in the cable, or you will have problems. In that instance, if it was plugged into windows without installing the driver first, you may need to remove it from device manager, and install the windows driver, and then plug it in again. I think Linux does not need a driver installed. Glenn ----- Original Message ----- From: "Dick Smith" w4rss@radioclub.org To: chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 9:01 AM Subject: [chirp_users] ID-880H
I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Patrick Lang at stickpatrick@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Well, maybe it was just a problem for my cable, but it stated windows in general. I think it said that windows would find a driver, but it will find the wrong one. It identifies the cable, but it will not work right. Glenn ----- Original Message ----- From: "Patrick Lang" stickpatrick@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 7:43 PM Subject: Re: [chirp_users] ID-880H
What version of Windows?
8 and 10 automatically found the driver on my valley cable
Sent from a tiny keyboard
On Aug 23, 2016, at 8:14 PM, Glenn glennervin@cableone.net wrote:
Dick, If you are using Windows, you need to install the driver before ever plugging in the cable, or you will have problems. In that instance, if it was plugged into windows without installing the driver first, you may need to remove it from device manager, and install the windows driver, and then plug it in again. I think Linux does not need a driver installed. Glenn ----- Original Message ----- From: "Dick Smith" w4rss@radioclub.org To: chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 9:01 AM Subject: [chirp_users] ID-880H
I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Patrick Lang at stickpatrick@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
If your cable shows to be a Prolific, roll your driver back to 3.2.0.0.
Jardy Dawson WA7JRD Sent from the Death Star for Darth Vader's eyes only. Any other reception will be severely punished. 💀
On Aug 23, 2016, at 17:49, Glenn glennervin@cableone.net wrote:
Well, maybe it was just a problem for my cable, but it stated windows in general. I think it said that windows would find a driver, but it will find the wrong one. It identifies the cable, but it will not work right. Glenn ----- Original Message ----- From: "Patrick Lang" stickpatrick@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 7:43 PM Subject: Re: [chirp_users] ID-880H
What version of Windows?
8 and 10 automatically found the driver on my valley cable
Sent from a tiny keyboard
On Aug 23, 2016, at 8:14 PM, Glenn glennervin@cableone.net wrote:
Dick, If you are using Windows, you need to install the driver before ever plugging in the cable, or you will have problems. In that instance, if it was plugged into windows without installing the driver first, you may need to remove it from device manager, and install the windows driver, and then plug it in again. I think Linux does not need a driver installed. Glenn ----- Original Message ----- From: "Dick Smith" w4rss@radioclub.org To: chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 9:01 AM Subject: [chirp_users] ID-880H
I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Patrick Lang at stickpatrick@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Or change to a cable with a FTDI chip - the driver's far more stable. Honest. BTDT with Prolific. Valium helped me to calm down when it failed yet again. (only kidding about the Valium - the rest is too, too true)
73 de KC3DOO Rick
On 8/23/2016 8:54 PM, Jardy via chirp_users wrote:
If your cable shows to be a Prolific, roll your driver back to 3.2.0.0.
Jardy Dawson WA7JRD Sent from the Death Star for Darth Vader's eyes only. Any other reception will be severely punished. 💀
On Aug 23, 2016, at 17:49, Glenn glennervin@cableone.net wrote:
Well, maybe it was just a problem for my cable, but it stated windows in general. I think it said that windows would find a driver, but it will find the wrong one. It identifies the cable, but it will not work right. Glenn ----- Original Message ----- From: "Patrick Lang" stickpatrick@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 7:43 PM Subject: Re: [chirp_users] ID-880H
What version of Windows?
8 and 10 automatically found the driver on my valley cable
Sent from a tiny keyboard
On Aug 23, 2016, at 8:14 PM, Glenn glennervin@cableone.net wrote:
Dick, If you are using Windows, you need to install the driver before ever plugging in the cable, or you will have problems. In that instance, if it was plugged into windows without installing the driver first, you may need to remove it from device manager, and install the windows driver, and then plug it in again. I think Linux does not need a driver installed. Glenn ----- Original Message ----- From: "Dick Smith" w4rss@radioclub.org To: chirp_users@intrepid.danplanet.com Sent: Tuesday, August 23, 2016 9:01 AM Subject: [chirp_users] ID-880H
I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly.
Any thoughts?
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Patrick Lang at stickpatrick@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KC3DOO at pavilion@pinefields.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (7)
-
Dick Smith -
Glenn -
Jardy -
Patrick Lang -
Richard -
Richard B. Emerson -
w4grj＠satterfield.org