On Sat, Mar 5, 2016 at 2:41 PM, Danny Richardson k6mhe@k6mhe.com wrote:

Can anyone tell me if current version of CHIRP workswith the Baofeng UV5-RTP.

Thanks & 73,

Danny

Danny,

If you go to the CHIRP Home/Wiki page and look at the Supported Radio Models list,

http://chirp.danplanet.com/projects/chirp/wiki/Home

under Baofeng/Pofung you will see...

BF-F8HP (in daily builds) Also includes the BF-A58 Also includes the BF-F9V2+ Also includes the GT-3TP Also includes the UV-5RTP <-- this is your radio Also includes the UV-5R7W

Jim KC9HI

Danny, select the BF-F8HP in Chirp to read from, write to and program your radio. It has the 3 power levels you can set your radio to (High, Med & Low). I have a UV-5RTP and it works fine. It's in the same family as the BF-F8HP. Dan Jolley

From: Danny Richardson k6mhe@k6mhe.com To: chirp_users@intrepid.danplanet.com Sent: Saturday, March 5, 2016 1:41 PM Subject: [chirp_users] UV5-RTP question

Can anyone tell me if current version of CHIRP workswith the Baofeng UV5-RTP.

Thanks & 73,

Danny

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Jolley at oldhippie1955@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com