I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT top. I cannot find ant specific control that performs this function. Does anyone have any thoughts?
Steve
On Mon, Mar 21, 2016 at 3:36 PM, Stephen Hutter stephen.r.hutter@gmail.com wrote:
I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT top. I cannot find ant specific control that performs this function. Does anyone have any thoughts?
When you view the channel data in Chirp, receive-only channels will show "off" in the duplex column. Change it to any one of the other options (whatever is appropriate) and the channel will allow transmit.
Tom KD7LXL
It does when it is on B but not on A. A also gets locked on the channel set at boot time and won't change channels.
On Mon, Mar 21, 2016 at 6:40 PM, Tom Hayward tom@tomh.us wrote:
On Mon, Mar 21, 2016 at 3:36 PM, Stephen Hutter stephen.r.hutter@gmail.com wrote:
I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT
top. I
cannot find ant specific control that performs this function. Does
anyone
have any thoughts?
When you view the channel data in Chirp, receive-only channels will show "off" in the duplex column. Change it to any one of the other options (whatever is appropriate) and the channel will allow transmit.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Stephen Hutter at stephen.r.hutter@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I got it. The Dual Watch priority switch was set to B. It simply did what I had told it to. Thanks for your help.
Steve KM4SGO
On Mon, Mar 21, 2016 at 6:47 PM, Stephen Hutter stephen.r.hutter@gmail.com wrote:
It does when it is on B but not on A. A also gets locked on the channel set at boot time and won't change channels.
On Mon, Mar 21, 2016 at 6:40 PM, Tom Hayward tom@tomh.us wrote:
On Mon, Mar 21, 2016 at 3:36 PM, Stephen Hutter stephen.r.hutter@gmail.com wrote:
I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT
top. I
cannot find ant specific control that performs this function. Does
anyone
have any thoughts?
When you view the channel data in Chirp, receive-only channels will show "off" in the duplex column. Change it to any one of the other options (whatever is appropriate) and the channel will allow transmit.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Stephen Hutter at stephen.r.hutter@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- SRH
Set Menu 34 TDR-AB to OFF. Setting to A or B locks it to the top or bottom display.
Tom
On 03/21/2016 17:36, Stephen Hutter wrote:
I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT top. I cannot find ant specific control that performs this function. Does anyone have any thoughts?
Steve
I forgot... that menu setting is Advance Settings/Dual Watch Priority in Chirp.
Tom
On 03/21/2016 17:45, Tom Consodine ND5Y via chirp_users wrote:
Set Menu 34 TDR-AB to OFF. Setting to A or B locks it to the top or bottom display.
Tom
On 03/21/2016 17:36, Stephen Hutter wrote:
I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT top. I cannot find ant specific control that performs this function. Does anyone have any thoughts?
Steve
A and B are not channels. They display the channels or frequencies you are currently using. If you have your real channels set improperly, then you would possibly have those problems. Review the FAQs and website of www.miklor.com. Answers lots and lots of questions.
Jardy Dawson WA7JRD Ham Radio
Message relayed through SETI (Search for Extra-Terrestrial Intelligence, although no terrestrial intelligence has been found yet, either)
On Mar 21, 2016, at 15:36, Stephen Hutter stephen.r.hutter@gmail.com wrote:
I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT top. I cannot find ant specific control that performs this function. Does anyone have any thoughts?
Steve
Thanks. I got it. The transmit priority switch was set to B. So, it is now Off and all is well. Thanks. Steve WM4SGO
Sent from my iPad
On Mar 21, 2016, at 8:10 PM, Jardy Dawson via chirp_users chirp_users@intrepid.danplanet.com wrote:
A and B are not channels. They display the channels or frequencies you are currently using. If you have your real channels set improperly, then you would possibly have those problems. Review the FAQs and website of www.miklor.com. Answers lots and lots of questions.
Jardy Dawson WA7JRD Ham Radio
Message relayed through SETI (Search for Extra-Terrestrial Intelligence, although no terrestrial intelligence has been found yet, either)
On Mar 21, 2016, at 15:36, Stephen Hutter stephen.r.hutter@gmail.com wrote:
I seem to have inadvertently set channel A to receive only. That is, I cannot switchh to it via the A/B button or switch to it via the PTT top. I cannot find ant specific control that performs this function. Does anyone have any thoughts?
Steve
-- SRH _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Stephen Hutter at stephen.r.hutter@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
Jardy Dawson -
Stephen Hutter -
Tom Consodine ND5Y -
Tom Hayward