[chirp_users] Uv82hp
Radio won't xmit. Just gets a beep like it is locked out of xmit. Uhf tx enabled (checked) in chirp. Busy channel lockout disabled. Same problem in vfo and mr modes. Ideas??
Hi Charles, Perhaps it got locked. Try holding down the button below the zero. HTH.
Glenn ----- Original Message ----- From: charlesdland To: chirp_users@intrepid.danplanet.com Sent: Tuesday, May 30, 2023 8:22 PM Subject: [chirp_users] Uv82hp
Radio won't xmit. Just gets a beep like it is locked out of xmit. Uhf tx enabled (checked) in chirp. Busy channel lockout disabled. Same problem in vfo and mr modes. Ideas??
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Tue, May 30, 2023 at 10:18 PM K0LNY glenn@ervin.email wrote:
Hi Charles, Perhaps it got locked. Try holding down the button below the zero. HTH.
Glenn
Hi Glenn,
This is a good thought, except the keypad lock only locks the keys on the front of the radio. It has no effect on the [PTT] button or side keys.
Jim KC9HI
I wonder if there is a key sequence for a full reset. Like hold down some specific buttons while powering it on. Glenn ----- Original Message ----- From: "Jim Unroe" rock.unroe@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Wednesday, May 31, 2023 6:11 AM Subject: Re: [chirp_users] Uv82hp
On Tue, May 30, 2023 at 10:18 PM K0LNY glenn@ervin.email wrote:
Hi Charles, Perhaps it got locked. Try holding down the button below the zero. HTH.
Glenn
Hi Glenn,
This is a good thought, except the keypad lock only locks the keys on the front of the radio. It has no effect on the [PTT] button or side keys.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Wed, May 31, 2023 at 11:01 AM K0LNY glenn@ervin.email wrote:
I wonder if there is a key sequence for a full reset. Like hold down some specific buttons while powering it on. Glenn
The UV-82HP has something like three different memory layouts. They are not compatible. So uploading a CHIRP Radio Images (*.img) file from a different radio using an older version of CHIRP that didn't protect for this could cause unwanted side effects. Some have been known to be; 1 the radio won't scan, 2 the radio won't receive unless the [MONI] button is pressed, 3 the radio won't TX.
If this is the case, which I am waiting for a reply to find out, then there is a special method that can perform a full upload of a "compatible" image to correct the problem that was created by previously uploading an "incompatible" image.
CHIRP now tries to protect from this but there is nothing preventing Baofeng from changing the memory layout in another place in the future. This is why I no longer recommend swapping images between Baofeng radios (even if the model and firmware versions are the same). The only safe way is to download from both radios to open a tab for each radios. Copy-and-paste the channels between tabs as needed and finally upload each tab back to the radio that created it.
Jim KC9HI
There is a reset procedure on youtube. Press "A' xmit, monitor andsomething else and power on. This is for newer radios to go out of band. Did help my problem. -------- Original message --------From: Jim Unroe rock.unroe@gmail.com Date: 5/31/23 10:20 AM (GMT-06:00) To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Uv82hp On Wed, May 31, 2023 at 11:01 AM K0LNY glenn@ervin.email wrote:>> I wonder if there is a key sequence for a full reset.> Like hold down some specific buttons while powering it on.> GlennThe UV-82HP has something like three different memory layouts. Theyare not compatible. So uploading a CHIRP Radio Images (*.img) filefrom a different radio using an older version of CHIRP that didn'tprotect for this could cause unwanted side effects. Some have beenknown to be; 1 the radio won't scan, 2 the radio won't receive unlessthe [MONI] button is pressed, 3 the radio won't TX.If this is the case, which I am waiting for a reply to find out, thenthere is a special method that can perform a full upload of a"compatible" image to correct the problem that was created bypreviously uploading an "incompatible" image.CHIRP now tries to protect from this but there is nothing preventingBaofeng from changing the memory layout in another place in thefuture. This is why I no longer recommend swapping images betweenBaofeng radios (even if the model and firmware versions are the same).The only safe way is to download from both radios to open a tab foreach radios. Copy-and-paste the channels between tabs as needed andfinally upload each tab back to the radio that created it.Jim KC9HI_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis message was sent to Charles Land at charlesdland@gmail.comTo unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.comTo report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.comSearchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Tue, May 30, 2023 at 9:23 PM charlesdland charlesdland@gmail.com wrote:
Radio won't xmit. Just gets a beep like it is locked out of xmit. Uhf tx enabled (checked) in chirp. Busy channel lockout disabled. Same problem in vfo and mr modes. Ideas??
Which version of CHIRP are you using? Did you happen to upload a CHIRP Radio Image (*.img) file that came from a different UV-82HP?
Jim KC9HI
participants (3)
-
charlesdland -
Jim Unroe -
K0LNY