Hi all,
I just posted 0.1.8b3 with the following changes:
- Added file type filters to import/export browse boxes - Added support for SKIP and PSKIP (where supported) for all radios - Fixed a bug where auto-set duplex isn't saved when frequency isn't changed - Fixed a bunch of duplex setting issues with IC2200 - Added NAM and NFM mode support for IC2200
I've got a V82 to play with for a while now, so I expect to add actual V82 support (right now the frequencies would be incorrect) soon.
Just to confirm, is group and channel read and write still unsuported? I assumed so as I didn't see any colums for it. Also I lost 3 or 4 channels when I sorted by channel number. Not Misplaced just gone......
-----Original Message----- From: chirp_users-bounces@lists.danplanet.com [mailto:chirp_users-bounces@lists.danplanet.com] On Behalf Of Dan Smith Sent: Sunday, November 23, 2008 2:28 PM To: Discussion of CHIRP Subject: [chirp_users] CHIRP 0.1.8b3
Hi all,
I just posted 0.1.8b3 with the following changes:
- Added file type filters to import/export browse boxes - Added support for SKIP and PSKIP (where supported) for all radios - Fixed a bug where auto-set duplex isn't saved when frequency isn't changed - Fixed a bunch of duplex setting issues with IC2200 - Added NAM and NFM mode support for IC2200
I've got a V82 to play with for a while now, so I expect to add actual V82 support (right now the frequencies would be incorrect) soon.
Just to confirm, is group and channel read and write still unsuported? I assumed so as I didn't see any colums for it.
Correct, I haven't done the bank stuff yet. I wanted to finish out all of the per-memory properties before I started in on that.
Also I lost 3 or 4 channels when I sorted by channel number. Not Misplaced just gone......
What does that mean exactly? Is it repeatable? Which radio?
I've certainly not seen that, and haven't heard of any trouble with that. Can anyone confirm that they do/don't see this behavior?
I had 43 channels after doing some clean up. The channels were in no specific order. I wanted to sort them alphabetically the renumber. After I sorted alphabetically, I had 39 channels not 43. In that there is no idiot function (undo) the were no recoverable. Resorting by channel number (original arrangement) still revealed only 39 channels. I don't know how you would duplicate such a thing. Just sorting doesn't seem to change anything.
Radio - ic-2820h
My end goal objective is to be able to duplicate channel memories between the different radios. One MAJOR problem still exists though. The ID-800 has a 6 position name field and the ic-2820 has an 8 digit name field. This presents a real problem when you try to incorporate a repeater, port, and destination into 6 positions. I would like to put it out to the group if anyone has come up with a naming convention that works for 6 positions. This is hard when trying to assign channels to call sign routing with multiple repeaters/ports. The call sign alone can use up all 6 positions. Using different groups for different repeaters might work but then scanning becomes a problem.
A bit off topic but I am struggling with a solution.
Thoughts from the group???????
N4DIB
-----Original Message----- From: chirp_users-bounces@lists.danplanet.com [mailto:chirp_users-bounces@lists.danplanet.com] On Behalf Of Dan Smith Sent: Sunday, November 23, 2008 7:23 PM To: Discussion of CHIRP Subject: Re: [chirp_users] CHIRP 0.1.8b3
Just to confirm, is group and channel read and write still unsuported? I assumed so as I didn't see any colums for it.
Correct, I haven't done the bank stuff yet. I wanted to finish out all of the per-memory properties before I started in on that.
Also I lost 3 or 4 channels when I sorted by channel number. Not Misplaced just gone......
What does that mean exactly? Is it repeatable? Which radio?
I've certainly not seen that, and haven't heard of any trouble with that. Can anyone confirm that they do/don't see this behavior?
I had 43 channels after doing some clean up. The channels were in no specific order. I wanted to sort them alphabetically the renumber. After I sorted alphabetically, I had 39 channels not 43. In that there is no idiot function (undo) the were no recoverable. Resorting by channel number (original arrangement) still revealed only 39 channels. I don't know how you would duplicate such a thing. Just sorting doesn't seem to change anything.
Well, if you didn't program your radio with the altered file, then you should be able to download your radio again and try to reproduce the issue.
Clicking on the column to sort doesn't change anything in the image itself, it only affects how it's displayed. The sorting is a function of the widget, which is part of the graphics library and not part of CHIRP itself. So, I'm a at a bit of a loss as to how sorting could possibly affect the image and memories themselves.
If you see it again, try to figure out what steps you took to get there so that we can try to figure out what might be going on. Also, noting which memories actually disappeared (like locations 3, 5, and 12, etc) and send me the image.
I bet VK3UR does a lot of sorting with radios packed to the gills with memory locations. Dave, have you ever seen memories fall out of the view when sorting by column?
participants (2)
-
Dan Smith -
Dave Cooley