[chirp_users] Pofung P8UV programming
A friend of mine, not knowing any better acquired 2 pofung P8UV radios, FCC ID: 2AJGM-P51UV.
The fact that the FCC's own website ( https://www.fcc.gov/oet/ea/fccid ) shows no record of this ID (though interestingly https://fcc.io does?!!!!!, now who owns FCC.io?) leaves me a bit concerned..... But that's another topic.
I'm trying to figure out how to program these to at least listen to other things than the channels they came with. The supported radio's list says P8UV _(use Radioddity UV-5G)_ but that does not work. I get "Error communicating with radio, Radio did not respond.". That said, I have verified the correct serial port being used and followed the directions about turning the radio on and off, etc. The radio is on and everything plugged in as far as I can tell properly but I still get the above error after repeated attempts. Chirp works fine programming my ANYTONE UV5888UVIII.
Ideas,
Thanks,
Eric
On Wed, 26 Jul 2023 10:33:02 -0700, eric.fort@fortconsulting.org wrote:
The fact that the FCC's own website ( https://www.fcc.gov/oet/ea/fccid ) shows no record of this ID (though interestingly https://fcc.io does?!!!!!, now who owns FCC.io?) leaves me a bit concerned..... But that's another topic.
fcc.io is apparently hosted in the UK, so not likely to be authoritative for the US FCC, who are hosted by Akamai in the US.
mdr
It is on the FCC site: Put 2AJGM in the first box and -P51UV in the second box. Brings up 6 entries.
On 7/26/23 12:33, eric.fort@fortconsulting.org wrote:
A friend of mine, not knowing any better acquired 2 pofung P8UV radios, FCC ID: 2AJGM-P51UV.
The fact that the FCC's own website ( https://www.fcc.gov/oet/ea/fccid ) shows no record of this ID (though interestingly https://fcc.io does?!!!!!, now who owns FCC.io?) leaves me a bit concerned..... But that's another topic.
I'm trying to figure out how to program these to at least listen to other things than the channels they came with. The supported radio's list says P8UV /(use Radioddity UV-5G)/ but that does not work. I get "Error communicating with radio, Radio did not respond.". That said, I have verified the correct serial port being used and followed the directions about turning the radio on and off, etc. The radio is on and everything plugged in as far as I can tell properly but I still get the above error after repeated attempts. Chirp works fine programming my ANYTONE UV5888UVIII.
Ideas,
Thanks,
Eric
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Paul AC0HY atac0hy@wpmills.com To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
GMRS only + part 15 for receiver on other freqs.
On 7/27/23 15:46, W Paul Mills wrote:
It is on the FCC site: Put 2AJGM in the first box and -P51UV in the second box. Brings up 6 entries.
On 7/26/23 12:33, eric.fort@fortconsulting.org wrote:
A friend of mine, not knowing any better acquired 2 pofung P8UV radios, FCC ID: 2AJGM-P51UV.
The fact that the FCC's own website ( https://www.fcc.gov/oet/ea/fccid ) shows no record of this ID (though interestingly https://fcc.io does?!!!!!, now who owns FCC.io?) leaves me a bit concerned..... But that's another topic.
I'm trying to figure out how to program these to at least listen to other things than the channels they came with. The supported radio's list says P8UV /(use Radioddity UV-5G)/ but that does not work. I get "Error communicating with radio, Radio did not respond.". That said, I have verified the correct serial port being used and followed the directions about turning the radio on and off, etc. The radio is on and everything plugged in as far as I can tell properly but I still get the above error after repeated attempts. Chirp works fine programming my ANYTONE UV5888UVIII.
Ideas,
Thanks,
Eric
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Paul AC0HY atac0hy@wpmills.com To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- /**************************************************
- Amateur Radio Station AC0HY *
- W. Paul Mills SN807 *
- Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
- President Kaw Valley Amateur Radio Club *
**************************************************/
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Paul AC0HY atac0hy@wpmills.com To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
participants (3)
-
eric.fort＠fortconsulting.org -
Michael Rathbun -
W Paul Mills