[chirp_users] Incorrect Transfer of Names for Baofeng UV-5R
You were correct that I needed to make a new account without the Ø in oder to installe in Window 10. Thank you for your quidance. I have a new cable and I am able to download and upload from the radio. I have a Baofeng UV-5R radio. This is the first time I do this, I wanted to make a simple data set with only 4 frekvencies in the table. I have activated in the settings that I want frekvency info in the top display (A) and name in the bottom display (B).
When I transfer to the radio all the frekvencies are transferred correctly, however the name in the first line is transfered to line (chanel) 0, 2 and 3. Only the name in line 1 (chanel 1) is transfered correctly to the radio. Can you please advise what I need to do in oder to get the names to transfer correctly?
-- Regards Torbjørn - LA8TP
When I transfer to the radio all the frekvencies are transferred correctly, however the name in the first line is transfered to line (chanel) 0, 2 and 3. Only the name in line 1 (chanel 1) is transfered correctly to the radio. Can you please advise what I need to do in oder to get the names to transfer correctly?
Hi Torbjørn,
The top (A) display line and bottom (B) display line are independent. They are not automatically synchronized. So when you cycle through the channels of the currently selected display line (the selected display line is the one with the black triangle to the left), the channel in the display line that is not selected does not change (you can see this by watching the small channel numbers to the right edge of each display line). So if you want (A) and (B) to both be set to channel 3, you must manually change them both to channel 3.
Jim
participants (2)
-
Jim Unroe -
Torbjørn Darre