[chirp_users] CODE PLUG
NEED A IMAGE FOR THE UV5R+, FIRMWARE IS 5NR-20 // BFB-297, I CHANGED IT SOMEHOW.
THANK YOU,
WAYNE WS3PC/N3PC
Well, I'm new to Ham Radio and programming, but I got the latest build (0.4.1) to run on my Raspberry Pi.
The instructions for running under Linux call for installing "python-gtk", which the Raspian OS could not find. So I tried "python-gtk2" which it did find and install and everything seems to work. At least for my Baofeng UV82.
I have an iPad and am really trying to avoid buying another laptop for traveling. This solves that problem. I carry my iPad and a Raspberry Pi and do all I need.
Thanks for CHIRP. Ric Honey KK4SZO
Pardon typos. Sent from my iPad.
On Oct 23, 2014, at 12:04 AM, ZIP-G zip.doe@gmail.com wrote:
NEED A IMAGE FOR THE UV5R+, FIRMWARE IS 5NR-20 // BFB-297, I CHANGED IT SOMEHOW.
THANK YOU,
WAYNE WS3PC/N3PC _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Ric,
I wouldn't recommend using the CHIRP v0.4.0 or v0.4.1 stable with Baofeng radios because of recent changes to the firmware. You are probably OK with an original UV-82, but if you should need to program a UV82C, BF-F8HP or one of the new UV-5R (including the many variants) you are urged to use CHIRP daily-20140717 or later/newer.
Jim KC9HI
On Thu, Oct 23, 2014 at 1:15 AM, Ric Honey ric@memphisastro.org wrote:
Well, I'm new to Ham Radio and programming, but I got the latest build (0.4.1) to run on my Raspberry Pi.
The instructions for running under Linux call for installing "python-gtk", which the Raspian OS could not find. So I tried "python-gtk2" which it did find and install and everything seems to work. At least for my Baofeng UV82.
I have an iPad and am really trying to avoid buying another laptop for traveling. This solves that problem. I carry my iPad and a Raspberry Pi and do all I need.
Thanks for CHIRP. Ric Honey KK4SZO
Thanks for the heads-up... fortunately, it's just a plain UV-82. Ric
On 10/23/2014 7:40 AM, Jim Unroe wrote:
Ric,
I wouldn't recommend using the CHIRP v0.4.0 or v0.4.1 stable with Baofeng radios because of recent changes to the firmware. You are probably OK with an original UV-82, but if you should need to program a UV82C, BF-F8HP or one of the new UV-5R (including the many variants) you are urged to use CHIRP daily-20140717 or later/newer.
Jim KC9HI
On Thu, Oct 23, 2014 at 1:15 AM, Ric Honey ric@memphisastro.org wrote:
Well, I'm new to Ham Radio and programming, but I got the latest build (0.4.1) to run on my Raspberry Pi.
The instructions for running under Linux call for installing "python-gtk", which the Raspian OS could not find. So I tried "python-gtk2" which it did find and install and everything seems to work. At least for my Baofeng UV82.
I have an iPad and am really trying to avoid buying another laptop for traveling. This solves that problem. I carry my iPad and a Raspberry Pi and do all I need.
Thanks for CHIRP. Ric Honey KK4SZO
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Just out of curiosity, are you somehow using the iPad as a console for the Raspberry Pi?
Otherwise, I would think you'd need some sort of monitor, keyboard, and mouse to connect to the RPi.
On 10/23/2014 12:15 AM, Ric Honey wrote:
Well, I'm new to Ham Radio and programming, but I got the latest build (0.4.1) to run on my Raspberry Pi.
The instructions for running under Linux call for installing "python-gtk", which the Raspian OS could not find. So I tried "python-gtk2" which it did find and install and everything seems to work. At least for my Baofeng UV82.
I have an iPad and am really trying to avoid buying another laptop for traveling. This solves that problem. I carry my iPad and a Raspberry Pi and do all I need.
Thanks for CHIRP. Ric Honey KK4SZO
Pardon typos. Sent from my iPad.
On Oct 23, 2014, at 12:04 AM, ZIP-G <zip.doe@gmail.com mailto:zip.doe@gmail.com> wrote:
*NEED A IMAGE FOR THE UV5R+, FIRMWARE IS 5NR-20 // BFB-297,* *I CHANGED IT SOMEHOW.* ** *THANK YOU,* ** *WAYNE * *WS3PC/N3PC* _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
I've used an iPad running iSSH to create a VNC session on the RPi. It works, but I would not recommend it if you intend to do a lot of editing.
Mike, N0SO
Just out of curiosity, are you somehow using the iPad as a console for the Raspberry Pi?
Otherwise, I would think you'd need some sort of monitor, keyboard, and mouse to connect to the RPi.
Wayne,
You should find what you need here...
http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/
Jim KC9HI
On Thu, Oct 23, 2014 at 1:04 AM, ZIP-G zip.doe@gmail.com wrote:
NEED A IMAGE FOR THE UV5R+, FIRMWARE IS 5NR-20 // BFB-297, I CHANGED IT SOMEHOW.
THANK YOU,
WAYNE WS3PC/N3PC
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
THANKS JIM,
UP AND RUNNING NOW, MAY BE HAVING SOME ISSUES WITH EXPORTING .CSV FILE. GET DIALOG "THERE WAS AN ERROR DURING EXPORT: 'SETTINGS EDITOR' OBJECT HAS NO ATTRIBUTE 'PREFILL'.
USING YESTERDAYS BUILD.
WAYNE ----- Original Message ----- From: Jim Unroe To: Discussion of CHIRP Sent: Thursday, October 23, 2014 08:29 Subject: Re: [chirp_users] CODE PLUG
Wayne,
You should find what you need here...
http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/
Jim KC9HI
On Thu, Oct 23, 2014 at 1:04 AM, ZIP-G zip.doe@gmail.com wrote:
NEED A IMAGE FOR THE UV5R+, FIRMWARE IS 5NR-20 // BFB-297, I CHANGED IT SOMEHOW.
THANK YOU,
WAYNE WS3PC/N3PC
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Wayne,
I am not able to duplicate this issue. Would you email your .img file to me so I can use it to investigate what you issue might be? It might not hurt to have a copy of your debug.log file, too. Here is how you find it.
http://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues
Email them to: uv5r [at] kc9hi [dot] net
Jim KC9HI
On Thu, Oct 23, 2014 at 11:31 AM, ZIP-G zip.doe@gmail.com wrote:
THANKS JIM,
UP AND RUNNING NOW, MAY BE HAVING SOME ISSUES WITH EXPORTING .CSV FILE. GET DIALOG "THERE WAS AN ERROR DURING EXPORT: 'SETTINGS EDITOR' OBJECT HAS NO ATTRIBUTE 'PREFILL'.
USING YESTERDAYS BUILD.
WAYNE
participants (5)
-
Aubrey Turner -
Jim Unroe -
mheitmann＠n0so.net -
Ric Honey -
ZIP-G