I can do it on mine. The UV5R is a part 90 radio and since it appears he is trying to put that radio on a part 90 licensed system, there should be no issue doing this. I programmed our park system when I was a board member into my UV5, so not sure what would prevent him from doing this.

I would put the 100 under Tone and ToneSQL. Set tone mode to Tone.

Duffy www.wb8nut.com

John Gorena mailto:John.Gorena@Gorena.org March 12, 2013 5:01 PM

If that is a legal radio, then you will not be able to do that because it is out of the programmable range.

70 cm is only 420 to 450 MHz. according to the "US Amateur Radio Band chart".

See the chart at

http://www.arrl.org/files/file/Hambands_color.pdf

--

John

*From:*chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Bill Hand *Sent:* Tuesday, March 12, 2013 3:41 PM *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] Programming Question for Baofeng UV-5R Radio

Hi everyone.

I've got what is probably a very basic question, but I'm not sure how to solve it.

At work we have Black Box 2-way UHF Radios with the following settings.

Receive Frequency: 464.xxxxx Mhz

CTS/DTS Decode: 100.0

2T Decode: None

Transmit Frequency: 469.xxxxx Mhz

CTS/DTS Encode 100.0

2T Encode: None

Beat Shift: No

Scan Add: Yes

Busy Lock: None

PPT ID: Off

Wide/Narrow: Wide

I am trying to program a BaoFeng UV-5R radio to work with our 2-way radio system. The question I have is what/where do I specify the CTS/DTS Decode/Encode values?

Also, any idea what the other settings in CHIRP should likely be set as (besides the frequency)

Thanks a million for your help.

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---