[chirp_users] Help needed: today's daily build
Hi all,
Yesterday we merged a change to clean up the settings interface a bit. It's a relatively minor visual change, but it affected a lot of code, including every driver that has a settings interface. We expect it to all be fine, but given how many things were touched, it would be good to do some extra checking.
Below is the list of drivers that were affected. If you have a radio that appears to be covered under one of the drivers below, I'd ask that you install today's daily build and check to make sure that the settings tab in CHIRP appears to work as expected.
alinco anytone ap510 baofeng_uv3r bjuv55 chirp_common ft1802 ft1d ft60 ft7800 ft817 ft857 ft90 ftm350 h777 ic2100 icf icq7 kenwood_live kguv8d kyd leixen settings th9800 th_uvf8d thuv1f tk8102 uv5r uvb5 vx2 vx3 vx8 wouxun
The build in question is this:
http://trac.chirp.danplanet.com/chirp_daily/daily-20150209
If you experience any trouble, please respond to this thread so we can take a look.
Thanks!
--Dan
Dan, All went well here on my Baofeng UV5RA. Thanks to all that keep Chirp going for us.
73s Bill ----- Original Message ----- From: Dan Smith To: Discussion of CHIRP Sent: Monday, February 09, 2015 10:23 AM Subject: [chirp_users] Help needed: today's daily build
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users Unsubscribe: http://intrepid.danplanet.com/mailman/options/chirp_users
It looks like the Wouxun KG-UVD1P settings are broken. A lot of the menus are missing from my KG-UV2D files.
Tom
On 02/09/2015 09:23, Dan Smith wrote:
Hi all,
Yesterday we merged a change to clean up the settings interface a bit. It's a relatively minor visual change, but it affected a lot of code, including every driver that has a settings interface. We expect it to all be fine, but given how many things were touched, it would be good to do some extra checking.
Below is the list of drivers that were affected. If you have a radio that appears to be covered under one of the drivers below, I'd ask that you install today's daily build and check to make sure that the settings tab in CHIRP appears to work as expected.
alinco anytone ap510 baofeng_uv3r bjuv55 chirp_common ft1802 ft1d ft60 ft7800 ft817 ft857 ft90 ftm350 h777 ic2100 icf icq7 kenwood_live kguv8d kyd leixen settings th9800 th_uvf8d thuv1f tk8102 uv5r uvb5 vx2 vx3 vx8 wouxun
The build in question is this:
http://trac.chirp.danplanet.com/chirp_daily/daily-20150209
If you experience any trouble, please respond to this thread so we can take a look.
Thanks!
--Dan
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users Unsubscribe: http://intrepid.danplanet.com/mailman/options/chirp_users
Dan, Your work and the work of all the volunteers is greatly appreciated.
Thank you to all...
John Http://www.miklor.com
On Feb 9, 2015, at 4:23 PM, Dan Smith dsmith@danplanet.com wrote:
It looks like the Wouxun KG-UVD1P settings are broken. A lot of the menus are missing from my KG-UV2D files.
Thanks, looks like Kosta already has a fix for this, which I've applied for tomorrow's daily build.
--Dan
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users Unsubscribe: http://intrepid.danplanet.com/mailman/options/chirp_users
participants (4)
-
Bill Gabbard -
Dan Smith -
John LaMartina ☀ -
Tom Consodine ND5Y