[chirp_users] Setting a channel to receive only
Hi,
I have a Baoefeng UV-5R that I program with chirp. Some of the frequencies I just want to monitor (such as the fire department). I did a search and it led me to Bug 211 in the Chirp Issues.
None of the instructions in the issue seem to work for me and the ticket has not been updated in 3 years.
Any information would be appreciated.
Scott WA6CGO
Scott, Under the "Duplex" column, set to "off" Bill ----- Original Message ----- From: Scott Miller To: chirp_users@intrepid.danplanet.com Sent: Thursday, August 13, 2015 7:23 PM Subject: [chirp_users] Setting a channel to receive only
Hi,
I have a Baoefeng UV-5R that I program with chirp. Some of the frequencies I just want to monitor (such as the fire department). I did a search and it led me to Bug 211 in the Chirp Issues.
None of the instructions in the issue seem to work for me and the ticket has not been updated in 3 years.
Any information would be appreciated.
Scott WA6CGO
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Thu, Aug 13, 2015 at 7:23 PM, Scott Miller smaction@slightlysuspect.com wrote:
The ticket had not been updated for 3 years because it was resolved and closed.
The miklor.com website has guides and examples for programming RX only channels.
http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI
participants (3)
-
Bill Gabbard -
Jim Unroe -
Scott Miller