The one problem I see is that the radio system is showing to be Wide band and as of January 1, assuming they are in the USA, needs to Narrow band.

Gary

-------Original Message------- From: Amateur Radio WB8NUT [duffy@wb8nut.com] Date: Tue, Mar 12, 2013 To: Discussion of CHIRP [chirp_users@intrepid.danplanet.com] Reply To: Discussion of CHIRP [chirp_users@intrepid.danplanet.com] Subject: Re: [chirp_users] Programming Question for Baofeng UV-5R Radio

I can do it on mine. The UV5R is a part 90 radio and since it appears he is trying to put that radio on a part 90 licensed system, there should be no issue doing this. I programmed our park system when I was a board member into my UV5, so not sure what would prevent him from doing this.

I would put the 100 under Tone and ToneSQL. Set tone mode to Tone.

Duffy www.wb8nut.com John Gorena March 12, 2013 5:01 PM If that is a legal radio, then you will not be able to do that because it is out of the programmable range.   70 cm is only 420 to 450 MHz. according to the “US Amateur Radio Band chart”. See the chart at http://www.arrl.org/files/file/Hambands_color.pdf   -- John     From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bill Hand Sent: Tuesday, March 12, 2013 3:41 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Programming Question for Baofeng UV-5R Radio   Hi everyone. I’ve got what is probably a very basic question, but I’m not sure how to solve it. At work we have Black Box 2-way UHF Radios with the following settings.   Receive Frequency:          464.xxxxx Mhz CTS/DTS Decode:              100.0 2T Decode:                       None Transmit Frequency:         469.xxxxx Mhz CTS/DTS Encode               100.0 2T Encode:                       None Beat Shift:                        No Scan Add:                         Yes Busy Lock:                        None PPT ID:                             Off Wide/Narrow:                   Wide   I am trying to program a BaoFeng UV-5R radio to work with our 2-way radio system.  The question I have is what/where do I specify the CTS/DTS Decode/Encode values? Also, any idea what the other settings in CHIRP should likely be set as (besides the frequency) Thanks a million for your help.     _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users