[chirp_users] Increasing scan "hang time" BF-F8HP
Is there a way to increase the amount of time the scan feature stays on a channel after traffic has stopped? Hard to grab the radio and see what channel (or frequency) the last traffic was on. This may have been asked and answered.
Thanks
Michael H Grossie mhgrossie@sbcglobal.net
Do you have scan resume set on CO?
Sent from my iPhone
On Aug 16, 2017, at 4:28 PM, Michael Grossie <mhgrossie@sbcglobal.netmailto:mhgrossie@sbcglobal.net> wrote:
Is there a way to increase the amount of time the scan feature stays on a channel after traffic has stopped? Hard to grab the radio and see what channel (or frequency) the last traffic was on. This may have been asked and answered.
Thanks
Michael H Grossie mhgrossie@sbcglobal.netmailto:mhgrossie@sbcglobal.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ERIC at camopainter@hotmail.commailto:camopainter@hotmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
On Wed, Aug 16, 2017 at 4:28 PM, Michael Grossie mhgrossie@sbcglobal.net wrote:
Is there a way to increase the amount of time the scan feature stays on a channel after traffic has stopped? Hard to grab the radio and see what channel (or frequency) the last traffic was on. This may have been asked and answered.
Thanks
Michael H Grossie mhgrossie@sbcglobal.net
The length of time before scanning resumes is fixed (SCAN=CO). Your only other option would be to set SCAN=SE.
Jim
Increase Scan Hang Time - Scan was set to "TO" Changed to "CO" will see if that makes a change. Thanks KG5UMH
Michael H Grossie mhgrossie@sbcglobal.net
On Wed, Aug 16, 2017 at 3:28 PM, Michael Grossie mhgrossie@sbcglobal.net wrote:
Is there a way to increase the amount of time the scan feature stays on a channel after traffic has stopped? Hard to grab the radio and see what channel (or frequency) the last traffic was on. This may have been asked and answered.
Thanks
Michael H Grossie mhgrossie@sbcglobal.net
Trying to program my Yaesu FT-857d. Is my reading of the supported features spreadsheet http://trac.chirp.danplanet.com/chirp_daily/LATEST/Model_Support.html correct: that there is no way to set RF power levels for memory channels through CHIRP? It would rather inconvenient if I have to set each one manually through the radio’s interface.
Thanks in advance, Gregory Penn
I see no way to do this. I've been using CHIRP with my 857D for about a year. I like CHIRP but there are some features missing.
KW4DOC Doc ----- Original Message ----- From: Gregory Penn To: Discussion of CHIRP Sent: Friday, August 18, 2017 9:20 AM Subject: [chirp_users] Yaesu FT-857d, RF Power
Trying to program my Yaesu FT-857d. Is my reading of the supported features spreadsheet correct: that there is no way to set RF power levels for memory channels through CHIRP? It would rather inconvenient if I have to set each one manually through the radio’s interface.
Thanks in advance, Gregory Penn
Virus-free. www.avg.com
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Doc Stevens at docstevens@bellsouth.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To be clear, the FT-8x7 itself does *not* have the capability of storing a per channel RF power setting. So there is nothing chirp can do to fix that.
--Rob W2RCT
On 8/18/2017 9:26 AM, Doc Stevens wrote:
I see no way to do this. I've been using CHIRP with my 857D for about a year. I like CHIRP but there are some features missing. KW4DOC Doc
----- Original Message ----- *From:* Gregory Penn <mailto:gregory.penn@gmail.com> *To:* Discussion of CHIRP <mailto:chirp_users@intrepid.danplanet.com> *Sent:* Friday, August 18, 2017 9:20 AM *Subject:* [chirp_users] Yaesu FT-857d, RF Power Trying to program my Yaesu FT-857d. Is my reading of the supported features spreadsheet <http://trac.chirp.danplanet.com/chirp_daily/LATEST/Model_Support.html> correct: that there is no way to set RF power levels for memory channels through CHIRP? It would rather inconvenient if I have to set each one manually through the radio’s interface. Thanks in advance, Gregory Penn <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. www.avg.com <http://www.avg.com> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Doc Stevens at docstevens@bellsouth.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to rct+chirp@r-t.org at rct+chirp@r-t.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
yes, it is a limitation of the 857 itself.
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Gregory Penn gregory.penn@gmail.com Sent: 18 August 2017 14:20 To: Discussion of CHIRP Subject: [chirp_users] Yaesu FT-857d, RF Power
Trying to program my Yaesu FT-857d. Is my reading of the supported features spreadsheethttp://trac.chirp.danplanet.com/chirp_daily/LATEST/Model_Support.html correct: that there is no way to set RF power levels for memory channels through CHIRP? It would rather inconvenient if I have to set each one manually through the radio’s interface.
Thanks in advance, Gregory Penn
Hi Michael,
I saw your post in the IRLP yahoo group. Did you get your questions answered?
Regards,
Chris KC9AD / W6
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Michael Grossie mhgrossie@sbcglobal.net Sent: Friday, August 18, 2017 6:16 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Increasing scan "hang time" BF-F8HP
Increase Scan Hang Time - Scan was set to "TO" Changed to "CO" will see if that makes a change. Thanks KG5UMH
Michael H Grossie mhgrossie@sbcglobal.netmailto:mhgrossie@sbcglobal.net
On Wed, Aug 16, 2017 at 3:28 PM, Michael Grossie <mhgrossie@sbcglobal.netmailto:mhgrossie@sbcglobal.net> wrote: Is there a way to increase the amount of time the scan feature stays on a channel after traffic has stopped? Hard to grab the radio and see what channel (or frequency) the last traffic was on. This may have been asked and answered.
Thanks
Michael H Grossie mhgrossie@sbcglobal.netmailto:mhgrossie@sbcglobal.net
participants (8)
-
Doc Stevens -
Eric H -
Gregory Penn -
Jim Unroe -
Michael Grossie -
Neil B -
Not D'Arcy Cain -
Robert Terzi