Have yoi tried just changing the cross mode to ->tone? It may work for you then.

Sent from my LG Mobile

Milton Hywatt mhywattt@yahoo.com wrote:

Evidently I've lost my marbles, not that I had many to lose

in the first place. The issue is decoding tone. Just want to open squelch only when tone is present and properly decoded.

Two public safety agencies. Standard PL toning used.

Now.. when setting up Chirp I can only get just DEC to appear on the display if I set the Tone Mode to Cross then the Cross Mode to --> Tone. Only reason to decode tone, eliminates the

repeater Morse code ID which is not transmitted with a tone encoded.

So is this all correctly done? Before I had it set to TSQL and Tone - Tone but it wasn't eliminating the repeater ID. So I set out for an alternative setting. I have it set up similar on a Wouxun HT and when it receives a signal it can't decode the green activity ligh illuminates but there is no audio. So far I haven't heard any ID which is usually every 15 minutes or less.

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

____________________________________________________________ How to Sleep Like a Rock Obey this one natural trick to fall asleep and stay asleep all night. http://thirdpartyoffers.juno.com/TGL3131/52e0428b3ed2542892441st02vuc