[chirp_users] Baofeng UV-5R Programming options
I downloaded the CHIRP program to be able to program the radio but what should the settings be for Tone Mode, Tone, ToneSql, DTCS Code, DTCS Rx, DTCS Pol, Cross Mode, Duplex, Offset, Mode.
I have the repeater frequency, offset, and tone, but what about these other settings???
Jerry Van Herrin
It is different worth each repeater. Check what their requirements are.
D. Buss KD9EBR
-----Original Message----- From: jerry31553@btconline.net To: chirp_users@intrepid.danplanet.com Sent: Sat, 10 Oct 2015 17:27 Subject: [chirp_users] Baofeng UV-5R Programming options
I downloaded the CHIRP program to be able to program the radio but what should the settings be for Tone Mode, Tone, ToneSql, DTCS Code, DTCS Rx, DTCS Pol, Cross Mode, Duplex, Offset, Mode.
I have the repeater frequency, offset, and tone, but what about these other settings???
Jerry Van Herrin
Look in your repeater directory for additional settings regarding tone etc. settings.
Some repeaters require tone settings to access etc.
Regards:
Paul Hazell VE3KBI
From: jerry31553@btconline.net Sent: Saturday, October 10, 2015 6:27 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R Programming options
I downloaded the CHIRP program to be able to program the radio but what should the settings be for Tone Mode, Tone, ToneSql, DTCS Code, DTCS Rx, DTCS Pol, Cross Mode, Duplex, Offset, Mode.
I have the repeater frequency, offset, and tone, but what about these other settings???
Jerry Van Herrin
-------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
Tom
On 10/10/2015 17:27, jerry31553@btconline.net wrote:
*I downloaded the CHIRP program to be able to program the radio but what should the settings be for Tone Mode, Tone, ToneSql, DTCS Code, DTCS Rx, DTCS Pol, Cross Mode, Duplex, Offset, Mode.* ** *I have the repeater frequency, offset, and tone, but what about these other settings???*
Section 6 of http://www.miklor.com/COM/UV_CHIRP.php has References, Guides and Examples that should helps you with the CHIRP setup.
It's very easy to use once familiar with the product.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of jerry31553@btconline.net Sent: Saturday, October 10, 2015 6:27 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R Programming options
I downloaded the CHIRP program to be able to program the radio but what should the settings be for Tone Mode, Tone, ToneSql, DTCS Code, DTCS Rx, DTCS Pol, Cross Mode, Duplex, Offset, Mode.
I have the repeater frequency, offset, and tone, but what about these other settings???
Jerry Van Herrin
Repeaterbook.com has the info you need.
Ed Kinsel KD9BDF
On Sat, Oct 10, 2015 at 5:44 PM, John LaMartina JohnLa@usa.net wrote:
Section 6 of http://www.miklor.com/COM/UV_CHIRP.php has References, Guides and Examples that should helps you with the CHIRP setup.
It’s very easy to use once familiar with the product.
John
*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of * jerry31553@btconline.net *Sent:* Saturday, October 10, 2015 6:27 PM *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] Baofeng UV-5R Programming options
*I downloaded the CHIRP program to be able to program the radio but what should the settings be for Tone Mode, Tone, ToneSql, DTCS Code, DTCS Rx, DTCS Pol, Cross Mode, Duplex, Offset, Mode.*
*I have the repeater frequency, offset, and tone, but what about these other settings???*
*Jerry Van Herrin*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Sat, Oct 10, 2015 at 6:27 PM, jerry31553@btconline.net wrote:
I downloaded the CHIRP program to be able to program the radio but what should the settings be for Tone Mode, Tone, ToneSql, DTCS Code, DTCS Rx, DTCS Pol, Cross Mode, Duplex, Offset, Mode.
I have the repeater frequency, offset, and tone, but what about these other settings???
Jerry Van Herrin
Jerry,
Look at these guides and examples.
http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI
participants (7)
-
David Buss -
jerry31553＠btconline.net -
Jim Unroe -
John LaMartina -
Paul Hazell -
Pluto -
Tom Consodine ND5Y