Your best course of action, in my opinion, is to submit a ticket/issue and when a developer gets back to you, they'll likely want you to attach the log file it generates in debug/advanced mode? Sorry, this is from memory...

But step one is register on the website and include the firmware level of the radio, if you can.

I suspect your issue isn't Mac-specific, since it really functions as it should, except for completion notice.

I assume you are running the latest daily build of CHIRP

Ken, N2VIP

On Dec 27, 2021, at 20:37, Channing Fell channingfell@gmail.com wrote:

Setup:

PC: MACBook Pro, late 2014, running Big Sur , USB- OPC-478p cable Radio: Icom IC-2820H

Sequence:

• Install and start CHIRP
• install clone cable USB-478p to MacBook, recognized with no errors
• Install device end of same clone cable, USB-478p to Icom Speaker1
• from CHIRP, download Radio (clone) successful
• UPLOAD Radio hangs with the progress bar around 95-98% complete
• CHIRP UPLOAD errors out (completion code not received from Radio)
• Remove the clone cable from Icom and it displays “CLONE ERROR”

The process for both download and upload to the IC-2820H works using Windows OS.

I have read a few posts, did some searches on this CHIRP website.. as well as a lot of time on the App support sites… there isn’t much if anything about how Apple changes USB and other function… but haven’t figured it out.

Any hints about where I should/could look to fix the MAC issue?

Thanks for reading…

Respectfully submitted, Deacon Channing Fell

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com