[chirp_users] Programming Both sides w/ PL/DPL
Hey everyone,
I have tried everything I can think of to put a DTCS on both sides of the radio, TX & RX and have had no luck. Could one of you folks zip me off the settings for that programming or send me in the right direction for them. Thanks!
Rich Gaun KG7ETW
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Richard P Gaun, III P.O. Box 382 Youngtown, Arizona 85363 Cell & Text 480-273-3755 The information contained within the referenced, linked, or directed email communication is intended to be a confidential communication between the original sender and recipient(s), and is to be treated as confidential. Any and all works, ideas, or copy within are not to be used in any manner other by which they were intended. If you believe you have received this or any other email in error, please contact me at the above email. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
On Mon, Oct 29, 2018 at 11:41 PM Richard Gaun rpgaun@gmail.com wrote:
Hey everyone,
I have tried everything I can think of to put a DTCS on both sides of the radio, TX & RX and have had no luck. Could one of you folks zip me off the settings for that programming or send me in the right direction for them. Thanks!
Rich Gaun KG7ETW
Hi Rich,
Tone Mode: DTCS (The radio will use DCS for transmit. In this mode, the receiver uses DCS with the same value as the transmitter) DTCS Code: {desired DTCS code} DTCS Pol: {desired DTCS polarity}
That's all there is to it.
http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI
participants (2)
-
Jim Unroe
-
Richard Gaun