Yes, that wasn't a complete explanation. After clicking Radio > Download from Radio, and then clicking Radio > Import from data source > RepeaterBook > RepeaterBook political query, and the selecting my state, county, and band and clicking OK, I get "No channels found" and an OK button. This was working perfectly fine (I was able to populate the channels and upload them to my radio) for the last week, which is when I got the radio and my license. I have no idea why it would stop working.

Thanks. John

Sent from [ProtonMail](https://protonmail.com), encrypted email based in Switzerland.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On May 10, 2018 8:42 AM, Dennis Wage dwage@dwage.com wrote:

Be a little more specific than this: "But now it"

Dennis M. Wage 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home [http://hammondb3organ.net%5D(http://hammondb3organ.net/) http://overdubs.net

On Thu, May 10, 2018 at 7:29 AM, onemorething--- via chirp_users chirp_users@intrepid.danplanet.com wrote:

...

If this is a duplicate message, I apologize. Minor email issues.

So, I'm new to ham radios and chirp, but I successfully used chirp to populate my Baofeng BF-F8HP with imported repeaters from RepeaterBook. But now it return the error "No Channels Found". Looking at the debug log it shows this link:

http://www.repeaterbook.com/repeaters/downloads/chirp.php?func=default&s...

When using this link in a browser it indicates that I need to be logged in. But I wasn't previously logged in when it initial and repeatedly worked.

Can anyone shed some light on why this stopped working?

Thanks so much. John

Sent from [ProtonMail](https://protonmail.com), encrypted email based in Switzerland.

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Apparently one does not need to be logged in, because it worked perfectly fine when I didn't even have an account. After discovering that it no longer worked, I created an account and tested the link found in the debug log. It still does not work in chirp, and I don't see a way to log in to repeaterbook.com within chirp. I logged in within a browser, but that apparently is not enough.

Sent from [ProtonMail](https://protonmail.com), encrypted email based in Switzerland.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On May 10, 2018 8:57 AM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:

You have to be logged in to repeaterbook.com.

You already knew this, but still ask questions? Take the easy route, just log in.

73 David N1EA

On Thu, May 10, 2018 at 8:29 AM, onemorething--- via chirp_users chirp_users@intrepid.danplanet.com wrote:

...

If this is a duplicate message, I apologize. Minor email issues.

So, I'm new to ham radios and chirp, but I successfully used chirp to populate my Baofeng BF-F8HP with imported repeaters from RepeaterBook. But now it return the error "No Channels Found". Looking at the debug log it shows this link:

http://www.repeaterbook.com/repeaters/downloads/chirp.php?func=default&s...

When using this link in a browser it indicates that I need to be logged in. But I wasn't previously logged in when it initial and repeatedly worked.

Can anyone shed some light on why this stopped working?

Thanks so much. John

Sent from [ProtonMail](https://protonmail.com), encrypted email based in Switzerland.

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Thanks, Jim. I'll contact RepeaterBook.

John

​Sent from ProtonMail, encrypted email based in Switzerland.​

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On May 10, 2018 9:57 AM, Jim Unroe rock.unroe@gmail.com wrote:

​​

On Thu, May 10, 2018 at 8:29 AM, onemorething--- via chirp_users

chirp_users@intrepid.danplanet.com wrote:

...

If this is a duplicate message, I apologize. Minor email issues.

So, I'm new to ham radios and chirp, but I successfully used chirp to

populate my Baofeng BF-F8HP with imported repeaters from RepeaterBook. But

now it return the error "No Channels Found". Looking at the debug log it

shows this link:

http://www.repeaterbook.com/repeaters/downloads/chirp.php?func=default&s...

When using this link in a browser it indicates that I need to be logged in.

But I wasn't previously logged in when it initial and repeatedly worked.

Can anyone shed some light on why this stopped working?

Thanks so much.

John

John,

Either RepeaterBook is having a problem with their service or they

have changed their API (which could break CHIRP support). You could

contact them or wait to see if their service gets restored.

Jim