John -
If you are trying to upload an image from a different radio with a different firmware version this is being stopped by the software because some radios were damaged when this happened. You can always download from the radio and copy the rows from the existing image, or export/import a CSV.
Good luck, Daniel KK6ANP
On Sat, Jun 13, 2015 at 12:04 AM, John Hutchinson jahutch@bigpond.com wrote:
Thanks for the info, I'll just have to wait for the patch. Flow of events went like this, open CHIRP get message of new version is available decided to pass at this stage. Connected new UV-82 and tried to upload my img but error about firmware but I was able to download OK and saved that img. Decided I should update to 0.4.1 and also installed the daily build. After that I could not talk to the radio at all, however, I was able to still connect successfully with my older UV-82. Reverted to the previous version 0.4.0 which allowed me to download but trying to upload the same img I get error massage about firmware, even though it is what I just downloaded. I'll just have to be patient and wait for the next daily build. Thanks gentlemen for the help John
On Fri, Jun 12, 2015 at 1:25 AM, John Hutchinson jahutch@bigpond.com
wrote:
I have successfully programmed UV82 in the past, seven in fact with the same .img file. I just bought 3 more and tried to upload to the radio but got error message that the Firmware version doesn't match that of the radio. I could Download from that radio and saved that file. Maybe upgrading CHIRP to the latest version 0.4.1 would help but didn't, so also ran Daily Build install hoping but no luck. I still get the same error message when trying to Upload and if I now try to Download, I get a message that it's the wrong model! I can still download from my older UV82. I see in Settings>Other Settings it shows the Firmware Message 1&2 which is different for the old and new radios but they are greyed out so can't change it. Older radios Firmware Message 1> ver Older radios Firmware Message 2> B82525 New radios Firmware Message 1> N822411 New radios Firmware Message 2> N822411 What do I do? Please help. John
CHIRP uses the firmware version to identify which radio model that the image file was saved from. The N82 firmware numbering series is new and therefor was unknown to CHIRP.
A patch to add this new numbering series was submitted earlier in the week. Once accepted, it will be available in the next CHIRP daily build release.
Baofeng is transitioning the UV-82 firmware to be more like the UV-5R firmware. For example, powering the radio on with the [5] key pressed displays the firmware version on the B82 radios where the [3] key must be used on the N82 radios. Like when the UV-5R series transitioned from the BFB firmware to the N5R firmware, the memory layout has been changed and images from B82 radios are not compatible with radios having N82 firmware (and the other way around).
To get around this, you will have to "Import" the channels from your master "image" or have a tab open for each firmware version so you can copy-and-paste between tabs.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com