Thanks for the suggestion, Todd. I've
tried using both ports on the front of the computer. I've also used the two
ports on the rear. All of them return the same "Unknown
USB Device (Device Descriptor Request Failed)"
I've had one reply on the TYT Yahoo group suggesting
I talk to RTSystems - but I couldn't get a straight answer out of them
regarding the TYT cable or their own. Hope she was just having a bad day.
Needless to say I didn't buy either their cable or their program.
//al
KH5HEJ
From:
chirp_users-bounces@intrepid.danplanet.com
[mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Todd Bloomingdale
Sent: Tuesday, September 15, 2015
15:12
To: Discussion of CHIRP
Subject: Re: [chirp_users] TYT
9800 / chirp driver
Al,
Are you using the same USB port that you currently use for
the Baofeng? I recently helped a friend with his 9800, and I use a baofeng. If
you have the 3.2.0.0 installed and using on a certain port. Try using the TYT
cord on that same port.
Todd Bloomingdale-KC9LOX
On Tue, Sep 15, 2015 at 11:39 AM, alfredmjones@yahoo.com <al@aljones.us> wrote:
I
need some ideas here. I have a Baofeng UV82L that I program with Chirp
and have no problem cloning this for the various UV5? radios that people have
around here. I'm comfortable with Chirp.
Recently
purchased a TYT 9800; I have no problem programming that from the front panel,
but I'm a computer junky and it's normally easier to enter / fix radio data
programmatically.
Running
Windows 10, updated; have a cable that claims to be a TYT (the label on the
cable); when plugged in device manager reports "Unknown USB Device (Device
Descriptor Request Failed)"
The
Prolific 3.2.0.0 driver announces itself as being available on com 4 when the
Baofeng cable is plugged in; however I see no com ports available for the TYT -
I have not been able to get either the driver that came with the disk or the
one available fro Grapevine (retailer in Dallas) to install.
Any
comments / suggestions would be appreciated. I'm at a loss.
//al
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com