Hello,
   I am nat able to download from my radio using Chrip. My radio is a
Baofeng uv-82. It is a new radio and I am new to chirp. My OS is
windows 7. The cable is a usb programming cable form Baofeng via
amazon.

The cable drivers are installed corectly. I can open the com port under
Tera Term and shorting the TX and RX contacts togethter I can get it echo
what I type. I can also probe the connection and see resonable data on the
O-scope.

I have tryed the stable as well as the nightly build of chirp. When I try
to download I get the error "the radio did not respond". It is hard to see
but I think the cable is seated al the way in. With just the cable and
tuning on the radio, It will not key but as soon as i plug the usb cable
in the radio will key.

I have also tried to download from the radio on "copying" mode by holding
down the 2 key while turning on the power. If I do this with tera term
opend to the right com port I get a repeating set of bytes that look to be
binary (garbaled ascii chars).

Any Ideas?

thanks,

kk6onl



_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users