Thanks Jim, Is there a keyboard command for selecting an entire column, like there is in Excel, or otherwise in the menus? Glenn ----- Original Message ----- From: "Jim Unroe" rock.unroe@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, December 25, 2018 8:34 PM Subject: Re: [chirp_users] TYT TH-9800power levels
On Tue, Dec 25, 2018 at 9:19 PM Glenn At Home GlennErvin@cableone.net wrote:
Hi, I tried importing a CSV file from my Baofeng into my new radio, the TYT, and after importing it, I read that all the power levels are on low. I noticed that I could use the properties to change it, but that is a lot of fields to do that to. When I open that CSV file in Excel, it shows that field as a 5 if I'm reading the correct field. If that is not the field, then the field with the power is not showing up in Excel. Also, while importing it, it encountered an error on line 160, but that is just one of the CB frequencies I put in, but it is not the first field, it is about half-way through the CB frequencies, I don't know what that is about. Thanks for any thoughts. Glenn
Glenn,
Highlight all of the memory rows that need the power level modified. Then click the [Properties] button at the top of the Spreadsheet Style Memory Editor (or right-click on of the memory rows and choose "Properties" in the menu that appears). Tick the box to the left of Power to enable editing and change the setting to the desired power level. Click [Ok] and the power level of all of the selected memory rows will be changed at the same time.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com