The OS is Win 7 with updates enabled, but I have been using Chirp for over a year with no hassles. What should the correct driver be?

Randy W4RTT

---

From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Larry Howell <larry.howell.47@gmail.com>
Sent: Sunday, July 22, 2018 7:01 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] ft897

 

Hi Randy,

You didn't say which OS your computer runs, so I''l assume it's Windows.  If you have it set to install updates automatically, or the OS is Windows 10, then Microsoft has probably replaced the driver with a different one that doesn't like the cable.  This typically occurs with cables that use the Prolific USB-serial chips.  Many cheap cable use clone chips that newer drivers detect and will ignore because they aren't Prolific chips.

Larry AC8YE

On Sun, Jul 22, 2018 at 6:27 PM, randy true <w4rttrandy@outlook.com> wrote:

Chirp has suddenly stopped communicating with my 897.

I have checked all com port settings in the program/computer/and radio All are OK.

The 897 will still work with other programs on the same com port.

Rebooted, no jot.

Should I try and reset the radio?

Randy W4RTT

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to larry.howell.47@gmail.com at larry.howell.47@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to larry.howell.47@gmail.com at larry.howell.47@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com