Hi Joseph,

Check parameter "Tone mode" on the channel you try to listen, it could cut the sound if this is set other than "None" on CHIRP.
if you want more information check RxDTCS information https://chirp.danplanet.com/projects/chirp/wiki/DevelopersToneModes

Christophe

De : joe Bonneville <isaiahrocks2010@gmail.com>
À : chirp_users@intrepid.danplanet.com
Envoyé le : Dimanche 20 janvier 2019 19h40
Objet : [chirp_users] Newbie BTECH UV-5X3

I have downloaded CHIRP and used to program my radio but after uploading data to my radio the channels are there but I have no sound when it picks up a signal. Any suggestions would be appreciated. 

--
Joseph Bonneville
C-(802)-289-1299
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to CHRISTOPHE DUPONT at josepa2mander@yahoo.fr
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com