thanks. would appreciate any help possible. with the advent of narrow banding, all our pagers will not work. we are paged out by the sheriffs department over a public government channel using the dtmf codes. have already explored their sending either a different pl tone, or a dcs signal, but their system is not capable

of doing either. for the price of a handfull of pagers, could equip the entire department with these units, and gain a talk around radio.

not sure what an Arduino sketch is

73 jim studer kf8sj

-----Original Message-----
From: Tom Morris <blueneon@gmail.com>
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Sat, May 25, 2013 7:40 pm
Subject: Re: [chirp_users] Baofeng UV5R dtmf on receive

Not implemented on the radio firmware. I have an Arduino sketch that may help, I'll send it tomorrow

Tom Morris, KG4CYX

Mad Scientist, Miami Children's Museum

This message sent from a mobile device. Silly typos provided free of charge.

On May 25, 2013 8:36 PM, <KF8SJ@aol.com> wrote:

i have need to use this radio as an alert pager for local vol. fire dept. see where to enable dtmf on transmit, but no capability to do so on receive. is this possible, and/or am i missing something in the programming.

basically need to receive only one tone.

thanks for help. jim kf8sj

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users