Just an idea. When I moved to where I live now I had no idea as to the frequencies in use so I went to a local ham club and found someone who kept an up to date list of frequencies and was nice enough to give me a copy. Maybe you can check around in your area and have similar luck.
Sent from my Galaxy Tab® A -------- Original message --------From: Jim McIver jmciver@lmtribune.com Date: 4/2/17 7:42 PM (GMT-04:00) To: Chirp chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Fwd: baofeng 82c Dang, thought I had it figured out. Search and Rescue in my area doesn't use any ham frequencies, just frequencies between 136-174mhz. I have 128 channels in my kenwood tk-2170 that includes a 5 county area. I'm probably looking at months to figure it out. The kenwood shows None in the QT/DQT Dec, so I don't know if I should leave the Tone to the default of 88.5. Tedious typing as I only have 17 of the 128 keyed so far and looks like I'll have to change some when I figure what might work. thx,-jm From: "Jim Unroe" rock.unroe@gmail.com To: "Chirp" chirp_users@intrepid.danplanet.com Sent: Sunday, April 2, 2017 4:24:11 PM Subject: Re: [chirp_users] Fwd: baofeng 82c
On Sun, Apr 2, 2017 at 6:57 PM, Jim McIver jmciver@lmtribune.com wrote:
Ok. So that means all my channels need to be TSQL if I am to be able to transmit and receive, if that's the only one where you can TX and RX. Unhiding the fields allowed me to see it was putting info in Tone and ToneSql even though hidden the Tone showed blank.
thx, -jm
Not exactly. TSQL is used to TX with a particular CTCSS tone and to RX with the same CTCSS tone. You never need to have a tone to RX so you can receive just fine using setting Tone Mode to Tone and setting the Tone column to the desired CTCSS tone. If you program a RX tone and the other station does not transmit the matching (on none at all as in the case for many ham repeaters), you will never hear anything. None always works.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim M at jmciver@lmtribune.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com