On Tue, Aug 9, 2016 at 4:09 AM, bernard.dowley@sky.com wrote:
Hi
Using Chirp with either a Baofeng UV-5R or Intek KT 980HP is it possible to remove the 2 metre and 70 centimetre facility so that only the user programmed frequencies are available for use.
Any help appreciated
Regards
Bernie Bernard Dowley
Hi Bernie,
If you are looking to disable either to both bands in the VFOs so the user cannot program memory channels, this is easy. Just program either or both lower band limits with a value that is higher than the upper band limit (I usually just swap them). This makes it impossible to enter a frequency into the VFO and therefor makes it impossible to program any channels using menu 27 (MEM-CH).
Just be aware the radio user can still use menu 40 (RESET) to erase all of the channels leaving the factory channels 0 and 127, but no other channels can be programmed.
Jim KC9HI