Hey Robin, I am also new to the Baofeng. I have just found the problem answer that drove me crazy. By lengthy elimanation I finally found the problem was NOT with the radio, cable or software. By sheer stumbling luck I finally found that when the radio would program perfectly it was immediately AFTER a PC Restart. Now if my UV5R wont PC program, I just restart my PC and boom all works correctly. Sarge KE5YPB
On Fri, Sep 12, 2014 at 12:48 AM, Antoon Rubbens antoonr@gmail.com wrote:
Helle Robin, welcome to the group!
Although I don't have a ready solution for your problem, I want to make clear that you don't need the cable connected to your computer te be able to start Chirp. Chirp is just a program, that will run at any time. It only needs the cabe (or more exactely a COM-port) to communicate with the radio. So, as long as you do not need to communicate with the radio (eg. because you want to edit a file) is will not matter if the cable is connected or not.
Having said that, please disconnect te cable and see if Chirp starts correctly. This way you will be able to check if it is a Chirp problem or a cable problem that you have.
When it looks like a Chirp problem, please try the stable version. I also use that version and it will work with the UV-82 (I use one).
To check if the cable is installed correctly, please check your Device Manager, Ports (COM & LPT). Your cable should be listed there. It will also mention the COM-port-number that you will need to select in Chirp when you want to communicate with the radio later.
I hope this helps!
73's Antoon (PA2AR).
2014-09-11 21:00 GMT+02:00 chirp_users-request@intrepid.danplanet.com:
Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
- CHIRP won't open (UV-82) (Robin)
Message: 1 Date: Wed, 10 Sep 2014 17:22:45 -0700 From: Robin clemero1@yahoo.com Subject: [chirp_users] CHIRP won't open (UV-82) To: CHIRP chirp_users@intrepid.danplanet.com Message-ID: 1410394965.88676.YahooMailNeo@web121603.mail.ne1.yahoo.com Content-Type: text/plain; charset="us-ascii"
Good evening all,
Thanks for adding me to the group. This is my first msg to the group!
I recently purchase 3 Baofeng UV-82 with the original Baofeng programing cable. I followed the instruction to the letter on on http://www.miklor.com/COM/UV_CHIRP.php#start to installed the driver and the CHIRP software. Now when I click on the CHIRP icon, the msg : ''Error reporting is disable : If you wish to disable this feature, you may do so in the help menu.'' I click OK and the dialogue box closes and the program doesn't open. I have the correct driver and I downloaded the program (daily version). The cable is correctly connected to my computer and to my radio (the pins are completely pushed into the radio). Before I click the CHIRP icon, I have the radio plugged into the computer and it's on frequency mode.
Is there anything I've missed or someone can think of? Any help would be greatly appreciated :)
Thanks
Robin