On 11/26/2013 07:38 PM, Raymond J. Blacketer wrote:
I finally got so my computer would recognize the Baofeng UV-5R**download cable, and when I went to Chirp and I select "down load from computer", it says "cloning" but only downloads one frequency, i.e., 136,025000.......
I believe you meant "down load from radio".
It is easy to remember, down load from radio, up load from computer to radio.
It sounds like you are 90% of the way there. If you can download from the radio, then you should see any channels frequency which was on the radio to begin with (pre-down load).
Next in the spreadsheet you add the new frequency/ies to the spreadsheet.
Follow that with an upload to radio. Disconnect the radio and power cycle it. Check to ensure the new channels and frequencies are correct. And you are done.
Tony