Thx Jim!
Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA E-mail: sre.1966@gmail.com Home phone: (801) 444-3445 Cell: (605) 209-6064
On Wed, Apr 22, 2015 at 3:40 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Apr 22, 2015 at 12:42 AM, Shon Edwards sre.1966@gmail.com wrote:
Am getting this error message "Upload finished, but the 'Other Settings' could not be sent because the firmware version of the image ( Ver
B82S26
) does not match that of the radio ( Ver B82S28 )."
Am trying to upload info to a Baofeng UV-82X and getting this message.
It's
possible my CHIRP version may not be new enough. Seems to still transfer the frequencies and labels. Not sure what is NOT being transferred
because
of this.
Does anyone know what needs to be done to get rid of the error message?
Or
what is not getting transferred? Anything to worry about?
Thx,
Shon
The error message means just what it says. You are uploading a CHIRP Radio Image (*.img) file that was saved from another radio with a different firmware version into your radio. CHIRP uploads the "main" memory that has the per-channel data and most settings but stops short of the "aux" memory which is firmware specific. Until recently it was considered safe to swap the "main" memory between radios with different firmware version but still withing the same model family. But in late 2014 Baofeng made memory layout changes to the "main" memory so that it is no long safe to exchange the "main" memory among different firmware versions. If you were using the latest CHIRP daily build, it would have refused to upload the image because the firmware version of the data file does not exactly match the firmware version of the radio.
To get this error to stop, all you do is download the channels and settings from your radio to create a tab that is compatible with your radio. Then you can load the "foreign" image into another tab allowing you to copy-and-paste the channels from the tab from B82S26 radio to the tab for your B82S28 radio. Another method, which I prefer, is once you've download from your radio into a tab, then you use the CHIRP File -> Import method to import the B82S286 image's channels into the tab from your radio.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com