If Device Manager shows your cable to be a Prolific cable, try rolling your driver back to 3.2.0.0. Info found at www.miklor.com.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Jul 20, 2018, at 22:05, Robert Smits bob@rsmits.ca wrote:
I’ve been having trouble getting Chirp to work with my Baofeng GT3 and a Windows 8 machine. Chirp just cannot read the usb port and the radio. I have tried a different cable (that ironically worked under Win 7) and this cable worked with a different radio (same model) and Win 10. The software I have installed is chirp-daily-20180707-installer.exe. When the cable is plugged in I can see the description in device manager.
Some suggestions about where to go from here would be appreciated. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com