As long as the transmit and receive frequency are correct ignore the 000 offset. The boafeng will also ignore the 000. That is just how the radio works. Even if you program from the key pad the radio ignores the offset. It only works from the transmit and receive frequency WB2UFO -- Larry Sent from my Nexus 7
Allan Cordova allan.cordova@gmail.com wrote:
Hello,
In uploading the chirp settings to my baofeng uv5ra, it appears that all settings are saving to to the radio correctly - except for the offset settings which just read 0.000. The frequencies are for 70 cm fm receivers in my area, so all the values in the chirp file are 5 MHz.
Apologies if this question is better directed to a baofeng support forum, but I suspected some folks on this mailing list were likely to have encountered this question before.
Thanks in advance for any feedback,
Allan
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users