6 Sep
2019
6 Sep
'19
6:07 a.m.
There is continual handshaking.
On 06 September 2019 at 08:38 Michal Smialowski mooksmd@gmail.com wrote:
I am able to download from the VX-170 but not upload. I take it that the same "clone" mode is used for download and upload. I note that the data for Rx and Tx go through the same pin on the 4 pin yaesu connector. I assume that the Rx and Tx data alternate on the same line because it is shared. Question: When uploading to the radio , does the software need to Tx and Rx to/from the PC to the radio or does it just Tx from PC to radio ? ie is there handshaking involved or just a steady transmit stream from the PC to the radio? tnx Mike VE7SML _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net