Yes, John, they use the same cable.
No, John, the Radio did not respond error is not one described on the miklor site. My plug is trimmed and installed all the way in. The radio was turned on. The FTDi device driver is compatible with the programming cable, works fine on 6 various models of the UR5. The FTDi Programming cable is not defective, works fine on 6 various models of the UR5.
So, I appreciate your thoughts, but no, standard errors we have all worked through is not the issue here. Thats why my naïve statement was that it must be a timing issue not seen on the older prolific driver but is seen by the FTDi driver. But then, I am not a developer working on Chirp software.
David ND1Q
The GT-3 and UV5R use the same programming cable.
Is it possible the error could be one of the following described at:
http://www.miklor.com/HT/HT-ErrorMess.php
John K3NXU