Hi Bill, Tom, John and everyone!
First of all, we should keep in mind that this group is for CHIRP users, not only for HAMs.

Now, Bill, I might be wrong, but if I would do as follows:

First, make sure you're in frequency mode, and on line A (top

line).

Let's say you want to program 464.550 on RX and 469.000 on TX, and a Pl code of 100.0, and you want it on memory channel 3.

enter:

[4] [6] [4] [5] [5] [0]


[menu] [1] [3] [menu] [1] [0] [0] [0] [menu] [exit]

 

[menu] [2] [7] [menu] [0] [0] [3] [menu] [exit] radio will say "receiving memory/channel/frequency" (I don't remember what she says, anymore)

 

[4] [6] [9] [0] [0] [0]

 

[menu] [2] [7] [menu] [0] [0] [3] [menu][exit] radio will say "transmitting memory/channel/frequency"

 

And you are done!

 

(This was taken from a document by Fred KD2DHI)




---------- Forwarded message ----------
From: Bill Hand <billtbyhand@outlook.com>
To: <chirp_users@intrepid.danplanet.com>
Cc: 
Date: Tue, 12 Mar 2013 16:40:36 -0400
Subject: [chirp_users] Programming Question for Baofeng UV-5R Radio

Hi everyone.

I’ve got what is probably a very basic question, but I’m not sure how to solve it.

At work we have Black Box 2-way UHF Radios with the following settings.

 

Receive Frequency:          464.xxxxx Mhz

CTS/DTS Decode:              100.0

2T Decode:                       None

Transmit Frequency:         469.xxxxx Mhz

CTS/DTS Encode               100.0

2T Encode:                       None

Beat Shift:                        No

Scan Add:                         Yes

Busy Lock:                        None

PPT ID:                             Off

Wide/Narrow:                   Wide

 

I am trying to program a BaoFeng UV-5R radio to work with our 2-way radio system.  The question I have is what/where do I specify the CTS/DTS Decode/Encode values?

Also, any idea what the other settings in CHIRP should likely be set as (besides the frequency)

Thanks a million for your help.

 

 



---------- Forwarded message ----------
From: Tom Hayward <esarfl@gmail.com>
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Cc: 
Date: Tue, 12 Mar 2013 13:45:42 -0700
Subject: Re: [chirp_users] Programming Question for Baofeng UV-5R Radio
On Tue, Mar 12, 2013 at 1:40 PM, Bill Hand <billtbyhand@outlook.com> wrote:
>
> I am trying to program a BaoFeng UV-5R radio to work with our 2-way radio system.  The question I have is what/where do I specify the CTS/DTS Decode/Encode values?

Chirp calls CTCSS "Tone" (encode) or "ToneSql" (encode and decode).

> Also, any idea what the other settings in CHIRP should likely be set as (besides the frequency)

This depends on the details of your license and personal preference.
Be careful when programming not to violate any of the terms of your
license.

Tom KD7LXL



---------- Forwarded message ----------
From: "John Gorena" <John.Gorena@Gorena.org>
To: "'Discussion of CHIRP'" <chirp_users@intrepid.danplanet.com>
Cc: 
Date: Tue, 12 Mar 2013 16:01:12 -0500
Subject: Re: [chirp_users] Programming Question for Baofeng UV-5R Radio

If that is a legal radio, then you will not be able to do that because it is out of the programmable range.

 

70 cm is only 420 to 450 MHz. according to the “US Amateur Radio Band chart”.

See the chart at

http://www.arrl.org/files/file/Hambands_color.pdf

 

--

John

 

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bill Hand
Sent: Tuesday, March 12, 2013 3:41 PM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] Programming Question for Baofeng UV-5R Radio

 

Hi everyone.

I’ve got what is probably a very basic question, but I’m not sure how to solve it.

At work we have Black Box 2-way UHF Radios with the following settings.

 

Receive Frequency:          464.xxxxx Mhz

CTS/DTS Decode:              100.0

2T Decode:                       None

Transmit Frequency:         469.xxxxx Mhz

CTS/DTS Encode               100.0

2T Encode:                       None

Beat Shift:                        No

Scan Add:                         Yes

Busy Lock:                        None

PPT ID:                             Off

Wide/Narrow:                   Wide

 

I am trying to program a BaoFeng UV-5R radio to work with our 2-way radio system.  The question I have is what/where do I specify the CTS/DTS Decode/Encode values?

Also, any idea what the other settings in CHIRP should likely be set as (besides the frequency)

Thanks a million for your help.

 

 


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users