Ah,crap. I knew it was going to be something incredibly simple.
Thank you, Chris KM4PUR On Feb 14, 2016 4:34 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Sun, Feb 14, 2016 at 4:24 PM, Chris Petry chrispetry1971@gmail.com wrote:
Good evening all,
Having some trouble using a UV5R with the software. It keeps saying I am choosing the wrong model. Forgive me if this has been gone over before,
I
did not see it in my review of emails.
Chris KM4PUR
Hi Chris,
If you are selecting UV-5R then you are choosing the wrong model.
BF-F8HP (in daily builds) Also includes the BF-A58 Also includes the BF-F9V2+ Also includes the GT-3TP Also includes the UV-5RTP Also includes the UV-5R7W <-- this is your radio
The above, cut-and-pasted from the "Supported Radio Models" list on the CHIRP home/wiki page, is intended to show that these UV-5R variants with 3 power levels all use the BF-F8HP model selection.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chris at chrispetry1971@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com