Billy,

Tell us these things.

What Operating System and Version are you using?
Example Windows Vista, or Arch Linux, etc.

Go to Device Manager if you're using Windows and see if there are any Warnings especially under connections and com ports. If so, what are the warnings?

Unplug your cable into the computer from your radio. One of the com ports will go away in Device Manager. Now plug it in, you should get a notification, what com port does it say? Do you get a notification?

Make sure the com port that you cable is using is the same one selected in CHIRP.

Regards,

David
N1EA 




On Tue, May 14, 2019, 20:56 Billy Shirer <bshirer80@gmail.com> wrote:
I only have 3 Comm Ports

On Tue, May 14, 2019, 8:46 PM Dan Jolley via chirp_users <chirp_users@intrepid.danplanet.com wrote:
Billy, sometimes Windows changes them back from 3.2.0.0. Check your COM PORT and make sure it is on COM5.

On Tuesday, May 14, 2019, 7:39:19 PM CDT, Billy Shirer <bshirer80@gmail.com> wrote:


Okay,  I will try that.
Thanks 

On Tue, May 14, 2019, 7:44 PM Jardy via chirp_users <chirp_users@intrepid.danplanet.com wrote:
Those cables can still be used if you roll the drivers back. Usually hits Prolific cables, use driver 3.2.0.0. No problems. 

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


On May 14, 2019, at 14:58, Steve Thomas <stevet@alertcpr.com> wrote:

Is it a new cable?  There are a lot of cables out there that have bad chips that used to work but don't work with newer versions of the Windows 10 driver.  And since Windows 10 automatically updates the drivers, some cables that used to work quit along the way.

On 5/14/2019 4:17 PM, Billy Shirer wrote:
Yes, and again nothing happened 

On Tue, May 14, 2019, 5:12 PM Glenn At Home <GlennErvin@cableone.net wrote:
Did you try to download from your radio first?
 
----- Original Message -----
Sent: Tuesday, May 14, 2019 4:03 PM
Subject: Re: [chirp_users] Baofeng-uv82

I windows 10

I downloaded the Chirp Software and I connected my cable to my laptop and opened the download and proceeded to program my radio and the a window opened and said......No file found 

On Tue, May 14, 2019, 4:41 PM Glenn At Home <GlennErvin@cableone.net wrote:
What is your OS?
What have you tried so far?
 
----- Original Message -----
Sent: Tuesday, May 14, 2019 3:22 PM
Subject: [chirp_users] Baofeng-uv82

I downloaded Chirp for my baofeng-uv82 and I can't get it Programmed 

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin@cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Billy Shirer at bshirer80@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin@cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Billy Shirer at bshirer80@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Steve Thomas at stevet@alertcpr.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- 
Steve Thomas, EMT-P
Executive Director
AlertCPR Emergency Training & Supply
Office 866-569-7139   Cell 214-912-7690
Stevet@alertcpr.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Billy Shirer at bshirer80@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dan Jolley at oldhippie1955@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Billy Shirer at bshirer80@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com